1. Catalogs
  2. SYSTEL Sarl
  3. HOT WATER HEATER RANGE

HOT WATER HEATER RANGE

HOT WATER HEATER RANGE
1 / 14 PagesView full catalog

HOT WATER HEATER RANGE

Product catalog summary
Hot Water Diffusion Range

1. Product Overview
This document provides technical specifications and features of hot water diffusion systems, including water heaters and aerotherms. It highlights the continuous improvement policy of Systel, allowing for technical and aesthetic modifications.

2. Aerotherm Water Heater Specifications
- EC Fan Ø 350, IP54 with a 220V plug.
- Treated exchanger with G 1/2" male connection.
- Power and consumption tables for different models (AEC 12, AEC 25, etc.) with details on air flow, power, water temperature, air inlet/outlet temperature, water flow, and pressure drop.

3. Heating Systems
- Hot water heating systems include finned tubes, aerotherms, and underfloor heating.
- Features include treated batteries, energy-saving fans, and easy assembly.
- Multilayer pipes offer time savings and durability.

4. Heat Production Systems
- Heat pumps (aerothermal and geothermal) with capacities ranging from 6 to 300 KW.
- Condensing boilers with efficiencies of 98 to 108% on PCI, suitable for propane, natural gas, or oil.
- Solar thermal systems with storage capacities from 150 to 12000 liters.

5. Sanitary Hot Water Systems
- Thermodynamic systems with capacities from 200 to 500 liters, featuring Danfoss compressors and R134a refrigerant.
- Electric systems with maximum temperatures of 85°C, available in floor or wall versions.
- Gas systems offering instant water heating with no storage, featuring condensing boilers.

6. Installation and Assembly
- Various mounting options including built-in wall, rotating wall support, and suspended horizontal blowing.

7. Contact Information
Systel - 4, rue de l'Essart Rocher, 44140 LE BIGNON, France. Phone: 00 33 (0) 2 51 85 25 55, Email: [email protected]
See more

Catalog excerpts

HOT WATER HEATER RANGE-1

DIFFUSION D’EAU CHAUDE GAMME DIFFUSION D’EAU CHAUDE

 Open the catalog to page 1
HOT WATER HEATER RANGE-2

AÉROTHERME EAU CHAUDE WATER HEATER AEROTHERMO AGUA CALIENTE

 Open the catalog to page 2
HOT WATER HEATER RANGE-3

Aerotherme Eau Chaude WATER HEATER AEROTHERMO AGUA CALIENTE CARACTERISTIQUES - CHARACTERISTICS - CARACTERISTICAS Batterie traitee, G 1/2", connection male. Prise 220 v. Ventilateur EC 0 350, IP 54. Treated exchanger, G 1/2", male connection. Plug 220 v. Fan EC 0 350, IP54. Bateria tratada, G 1/2", conexion macho. Enchufe 220 v. Ventilator EC 0 350, IP54. CARACTERISTIQUES DIMENSIONNELLES SUPPORT - SUPPORT - SOPORTE Puissance Power Potencia AEC 25 - Debit d'air / air flow / caudal de aire Photos et document non contractuels - Dans le souci d'une amelioration constante de...

 Open the catalog to page 3
HOT WATER HEATER RANGE-4

Plancher Chauffant

 Open the catalog to page 4
HOT WATER HEATER RANGE-5

- Étude personnalisée par bâtiment et production. - Couvre 100% du besoin de chauffage. - Répartition homogène sur l’ensemble du bâtiment. - Tube anodisé contre la corrosion externe et galvanique. - ouplage aluminium ou plastique. C - éactivité élevée, fort échange thermique contre R faible niveau d’eau. - ontage simple. M - Batterie traitée. - Ventilateur économie d’énergie IP54. - Démontable. - De 12 à 85 kw/h (régime d’eau 80/60°). - Gain de temps. - Propriétés techniques identiques au cuivre. - Durée de vie supérieure au cuivre. - Diamètre : 16 au 63mm. Photos et document non contractuels...

 Open the catalog to page 5
HOT WATER HEATER RANGE-6

POMPE À CHALEUR - Aérothermie - Géothermie CHAUDIÈRE - Condensation (Gaz/Fioul) - Basse température (Gaz/Fioul)

 Open the catalog to page 6
HOT WATER HEATER RANGE-7

POMPE À CHALEUR GÉOTHERMIE - De 7 à 140 KW. - Eau de chauffage jusqu’à 70°C. - Monophasé ou Triphasé. - Installation en cascade (sécurité renforcée). - De 6 à 300 KW. - apteur plan, Forage ou récupération sur laveur d’air. C - Eau de chauffage jusqu’à 65°C. - Monophasé ou Triphasé. - Installation en cascade (sécurité renforcée). CHAUDIÈRE CONDENSATION BASSE TEMPÉRATURE - e 20 à 400 KW. D - Propane, Gaz Naturel ou Fioul. - nstallation en cascade (sécurité renforcée). I - accordement cheminée ou ventouse. R - e 20 à 400 KW. D - ropane, Gaz Naturel ou Fioul. P - au de chauffage jusqu’à 85°C. E -...

 Open the catalog to page 7
HOT WATER HEATER RANGE-8

Aerotherme Eau Chaude WATER HEATER AEROTHERMO AGUA CALIENTE

 Open the catalog to page 8
HOT WATER HEATER RANGE-9

TABLEAU DE PUISSANCE/CONSOMMATION TABLE POWER/CONSUMPTION - CUADRO RELACION POTENCIA/CONSUMO AEC 85 - Debit d'air / air flow / caudal de aire : 8 500 M3/H

 Open the catalog to page 9
HOT WATER HEATER RANGE-10

AÉROTHERME EAU CHAUDE WATER HEATER AEROTHERMO AGUA CALIENTE CARACTÉRISTIQUES - CHARACTERISTICS - CARACTERÍSTICAS Coque en polyéthylène. Plastic schell. Cascara de poliethyleno. Batterie traitée. Treated exchanger. Bateria tratada. Ventilateur Ø 630 ou 500 mm. Fan Ø 630 or 500 mm. Ventilador Ø 630 ou 500 mm. Ventilateur IP54. Fan IP54. Ventilator IP54. Coffret électrique intégré (protection thermique ventilateur, transformateur 220/24 V pour vanne 3 voies, aquastat démarrage, ventilateur réglable). Integrated electric box (thermic protection, transformer 220/24 V, clikson starting 60°C). Caja...

 Open the catalog to page 10
HOT WATER HEATER RANGE-11

AÉROTHERME EAU CHAUDE WATER HEATER AEROTHERMO AGUA CALIENTE PLAN DE MONTAGE - ASSEMBLY PLAN - ESQUEMA DE MONTAJE Montage support paroi pivotant. Assembly wall rotating support. Montaje pared soporte giratorio. Montage suspendu soufflage horizontal. Assembly suspended horizontal blowing. Montage suspendido horizontal soplando. Photos et document non contractuels - Dans le souci d’une amélioration constante de nos produits, nous nous réservons le droit d’apporter toutes modifications liées à l’évolution technique et esthétique. Montage encastré paroi. Assembly built-in wall. Montaje

 Open the catalog to page 11
HOT WATER HEATER RANGE-13

TEMPERATURE MAXIMUM 85°C - Chauffage instantane de I'eau / Pas de stockage. - Puissance maximale = 56 kw. - Chaudiere a condensation. - Installation interieure ou exterieure - 1 000 litres d'eau a 75°C : • 0h38 avec 2 unites • 1h15 avec 1 unite ELECTRIQUE TEMPERATURE MAXIMUM 85 °C - De 200 a 500 L. - Ballon inox K44. - Resistante steatite dans un doigt de gant tubulaire inox. - Isolation liege brule granule compresse. - Version sol ou mural. - Cuve garantie 5 ans, elements electriques 2 ans. - Livre avec thermostat de reglage, thermometre et groupe de securite. Capacite (litres) Alimentation...

 Open the catalog to page 13
HOT WATER HEATER RANGE-14

sYsrevH systel 111 sysmiti sysm* SYSTEL HI SYSTEL m SYSTELSY5TEUHj I SySTElfll SYSTELHI SYSTEL ® SYSTEL8S)Sm I 5TEIHI SYSTEL «< SYSTEL « SYSTEL m SYSTEL m S>SlM SYSTELM SYSTELHI SYSTEL 8 SYSTELaSYSTEL *SrM " SYSTEL® SYSTEL® SYSTEL®SYSTEL®SYSTEL 'EM ElU* SYSTEL® SYSTEL® SYSTEL® SYSTEL®SYSTEL Et* sysm* s*sm* srsm*' ,, w sysm * sysm . s''

 Open the catalog to page 14

All SYSTEL Sarl catalogs and technical brochures

  1. BLOWER RANGE

    21  Pages

  2. BROODER RANGE

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.