EcoSensors System (EN)
12Pages

The Diffused Sensor System for Agriculture 4.0

The IoT system for agriculture that's easy to install and use Does the field staff have basic training? EcoSensors System is the diffused sensor system with decision support (DSS) designed and developed by Syde. EcoSensors System is the diffused sensor system for Agriculture 4.0, enabling the widespread deployment of sensors. With EcoSensors System, it is possible to remotely analyze the micro-dynamics of crops through the monitoring of various types of data and the creation of an accurate and comprehensive overview. EcoSensors System provides full control and the ability to analyze the...

Advantages • Continuous monitoring of weather data in the area Technical Specifications In its basic configuration, EcoSensors System measures air temperature, humidity, and pressure. The temperature, humidity, and pressure sensors feature: Pressure range: 300 hPa – 1100 hPa (±0.6 hPa) • Humidity range: 0 – 100% (±3%) • Temperature range: -40°C to +85°C (±0.1°C) • Power supply voltage: 3V +/- 10% • Ability to detect differences in various cultivation points • Implementation of strategic actions based on

Advantages Technical specifications The pest detection sensor is a patented system designed for maximum measurement capacity and easy management. It uses the principle of the traditional “trap.” The pest-attracting pheromone can be placed in a regular plastic bottle, as there is a standard screw fitting below the sensor that allows the bottle to be attached directly to it. This setup allows for flexible and adaptable monitoring over time, adjusting the readings to different situations and needs without requiring special or specific equipment. • Continuous monitoring of insect presence •...

Advantages Technical specifications • Continuous monitoring of wind speed • Operating temperature range: –40°C to +85°C • Increases effectiveness and efficiency • Resolution: 0.1 m/s • No maintenance required • It is recommended to install it while ensuring, as much as possible, that the cups are kept horizontal • Cups can be replaced as a unit • Useful for decision-making, such as when to apply treatments o

Advantages • Continuous monitoring of rainfall Technical specifications • Operating temperature range: –40°C to +85°C • Resolution: 0.5 mm of rain • No maintenance required • Equipped with protective mesh • It is recommended to install it while ensuring, as much as possible, that the container is kept horizontal • Optimization of planting and harvesting operations • More efficient strategi

Advantages Technical specifications The leaf wetness sensor is a capacitive sensor with a dual measurement surface. • Electrode shape: rectangular with an auxiliary compensation electrode for drift • Electrode surface: 78 x 48 mm • Resolution: 10 pF • Measurement range: 0 – 32,000 pF • Measurement indication: from 0% (dry leaf) to 100% (fully wet leaf surface) • Power supply voltage: 3V +/- 10% • Average current consumption: 20 uA • Simulates the thermodynamic behavior of the leaf • Extremely precise measurement of dew formation on foliage • Increased efficiency in predicting managing the...

Technical specifications • Measurement range: 0÷1500 W/m² • Sensor type: monocrystalline cell • Sensor accuracy: ± 5% • Protection rating: IP65 • When combined with other sensors, solar radiation allows for full knowledge of the plant’s health. • Continuous monitoring o

Advantages Technical specifications • Temperature range: -40°C to +85°C (±0.2°C) • Humidity range: 0 – 100% (±2%) • Power supply voltage: 2.15 – 5.5V • Cable length: 150 cm • Optimization of planting and harvesting processes • Reduction in water resource usage • Improved ability to predict pla

Advantages • Continuous monitoring of environmental conditions Technical specifications The sensors for VOC, CO2, and fine dust measurements are housed inside the base unit. • CO2 measurement is calculated based on environmental parameters and VOC levels • Measurement of fine dust: PM10 and PM2.5 • Measurement of volatile organic compounds • Monitoring performed • Ability to track and communicate the organic nature of

Data Compatibility with SydeCloud SydeCloud is the data storage solution owned by Syde, enabling secure storage of data collected from monitoring systems for Industry 4.0 and Agriculture 4.0. With SydeCloud, you can: • Securely store collected data in a cloud developed specifically for 4.0 monitoring systems. • Easily transform your field into a “Full Industry/ Agriculture 4.0” system. • Consult, analyze, and export your data effortlessly thanks to a user-friendly interface. • Monitor collected data at any time and from any device. There are virtually no limits on the types of data...

Eco Sensors System is a product Registered Office Via Leonardo Da Vinci 16, Florence (FI), 50132 Operational Headquarters Piazza Della Costituzione 5, Calenzano (FI), 50041