WRAP MACHINE [WM SERIES]

Product catalog summary

Overview: The document describes the features and specifications of the WM-511M and WM-511E wrap machines designed for wrapping hay, rice, and wheat straw. These machines are equipped with energy-saving designs that automatically reduce engine speed when wrapping is finished.

Main Features:

Low table design for easy loading and unloading of round bales.
Increased table rotation speed for higher efficiency.
Carrying handles and large-diameter tires for easy transportation.
Easy film setting with anti-vibration rubber to absorb vibrations.

Specifications:

Various models with different machine sizes, bale sizes, and tractor horsepower requirements.
Film system options include single and double wrapping with specific film widths.
Models are compatible with both motor and gasoline engines.

Operational Features:

Side loading system allows easy positioning of bales visible from the tractor driver's seat.
Automatic stop device activates when the film runs out during wrapping.
Full auto mode includes loading, wrapping, film cutting, table rotation, and unloading.
Manual operation available via hydraulic lever in case of electrical issues.

Options and Accessories:

Remote controller for wrapping start, unloading, and primary stop operations.
Back monitor for video surveillance of the area behind the machine.
Vertical unloading option to prevent damage to bales and film.
Double wrapping attachment to reduce film wrapping time.

Recommendations:

Use Takakita original film to avoid breakage or other problems.
Unloading horizontally is recommended in stationary operation.

Catalog excerpts

Easy film setting! • The low table makes it easy to load and unload round bales. Anti-vibration rubber to absorb vibration! Mini Wrap MachineFor Hay, Rice and Wheat Straw WM-511E (Gasoline Engine) • Table rotation speed increased for higher efficiency Carrying handles and large-diameter tires make carrying easy! *Takakita original film is recommended. Use of other films may result in breakage or other problems. s m my «,« ■ s« • dta ■ • ms • sett • saidt • ss* • kb • • aw • isam

Open the catalog to page 1

【3P Linkage Type】 Operation Process Initial Position 【Drawbar Type】 Side loading system for easy positioning! The position of bales can be seen from the tractor driver's seat to the right rear. Bales can be loaded without the need to watch turning around to the rear. Auto Wrapping Full Auto Mode 2P Linkage can also be used with low HP tractors Vertical Unloading Positioning Arm/Table Operation Loading Table Rotation Unloading can be switched to “VERTICAL”. Bale Size Φ90～100×85～100cm Tractor HP 14.7～33.1kW{20～44HS} Bale Size Φ90～120×85～120cm Tractor HP 18.4～51.5kW{25～69HP} Vertical Unloading Option...

Open the catalog to page 2

All TAKAKITA CO.,LTD. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list