Plastic filter backflush Unlike the common plastic filters, in this system, there is no need to disassemble and clean the filter inner set to clean the particles between the discs. As the filter is being cleaned at 100% while the system is running, irrigation continues uninterrupted and an efficient irrigation is provided even if the water contains heavy particles. Since the filter cleaning time is short (10-20 seconds), the amount of water discharged from the drain during backwashing is very low. When The filter is cleaned 100%, pressure loss in the system remains at a minimum level and prevents unnecessary energy costs. Technical Specification Flow Connection Rate Type m3 Packaging K T Weight Dimension (mm) (inch) (kg) W- D- H HELIX SYSTEM Specifications Body construction NA6 Max working pressure 8 BAR Min working temperature 0 °C Max working temperature 60 °C Filtering 130 Micron YÜK KAYBI TABLOSU Back Flush All the data sheets, schematics, manuals, photos and descriptions are for general purpose use only. Please contact nearest STF specialists for further information or technical support. The company reserves the right to change the design of their products without prior notic