OPERATOR’S MANUAL

IDENTIFICATION Dealer: Owner: Firm / Farm: City: No. of the Certificate of Guarantee: Serial / No.: Date: Product:

Introduction This operator's manual helps on the assembly process and provides the necessary information for the correct operation and maintenance, thus assuring a higher yield, safety and durability. This manual contains the necessary information for the best performance of your equipment. The operator and the maintenance staff must carefully read the entire manual before working with the equipment. They must also read and understand the safety recommendations. For any further explanation or in the case of technical problems that may arise during the service, consult your dealer and the Technical...

To the owner To the operator Data sheet Components Assembly Set-up instructions Hitching the equipment to a combine harvester Coupling the cardan shaft Upper protection Procedures to change the spacing 7. Adjustments and operations Cardan length adjustment Reducing the cardan shaft length Cardan assembly Changing the gearbox speed Gearbox speeds table Auger gearbox replacement Auger speeds table Sliding blades Chain guides Gathering chains and tighteners Joint bar of the sliding blades adjustment Pulling rollers Cleaning scraper Assembly of the roller tip Nozzle adjustment Auger / Auger adjustment...

1. To the owner The acquisition of any Tatu product assures to the original purchaser the following rights: - Warranty certificate; - Operator's manual; - Technical assistance by the dealer on equipment delivery. However, the owner must check the condition of the equipment on delivery, as well as knowing the warranty terms. Special attention should be given to the safety recommendations, operation precautions and maintenance of the equipment. The instructions in this manual indicates how to get the best performance and allow the operator to get maximum income, increasing the equipment lifetime....

2. To the operator Be careful with the environment Dear operator! Respect the ecology. Do not throw trash away. This gesture of goodwill helps to protect our environment. Products such as oil, fuel, filters, batteries and others are spilt over the soil and can penetrate to the underground layers, compromising nature. Ecological and conscious disposal of them should be done. Recycle damaged and disposable items to preserve a clean environment. Working safely This equipment is simple to operate, requiring however the basic and essential cautions to its handling. Always keep in mind that safety...

2. To the operator Working safely Never use your bare hands to check hydraulic leaks, the high pressure can cause injuries. Never attempt to change the adjustments, clean or lubricate the equipment when the same is switched on or in movement. Be careful while driving on slopes. Risk of overturn. Prevent that chemical products (i.e.: fertilizers and treated seeds) make any contact with your skin or clothes. Keep access and work places clean or free from oil and grease. Risk of accidents. Never transport the equipment on highways or paved roads. Avoid that the tractor wheels touch the drawbar in...

2. To the operator Working safely Have extreme caution when driving under electrical power lines. Any contact may result in severe shocks, injuries or death. Keep a safe distance from the equipment during the job. Do not open or remove the safety protections while the equipment is on. Shut down the engine and remove the tractor key from the ignition before carrying out any maintenance or repair on the equipment. Every professional should be oriented when lifting and carrying heavy loads to avoid any serious accident that a bad execution of this process may cause. .

2. To the operator Personal protective equipment (PPE) The personal protective equipment must be used as stated by the Ministry of Labor and Employment on the working standards. ATTENTION! - Safety must be present on every working step to avoid accidents, such as the impact of objects, falling, noises, cuts and similar. Therefore, the working person is subject to inner and outer damages to the body. Use earplugs or muffs to avoid loud noises that may lead to complications or hearing loss. Use gloves to protect your hands and arms from the abrasive elements that may cause cuts or scratches. Whenever...

2. To the operator General and mandatory safety measures 1. Only trained and qualified personnel are allowed to operate the equipment. 2. While working or during transportation, only the presence of the operator is allowed on the tractor. 3. Do not allow any passengers on the equipment during work or transportation. 4. Do not allow children to play or to get over the equipment while it is operating, during transportation or storage. 5. Have full knowledge of the soil before starting to work. Use the speed which is suitable to the conditions of the ground or pathways to be covered. Provide the...

2. To the operator Transportation over truck or trailer Marchesan does not advise the equipment traffic on highways, because this practice involves serious security risks in addition to being prohibited by the current existing traffic law. The transportation for long distances should be done on truck, trailer or others by following these safety guidelines: 1. Use adequate ramps to load or unload the equipment. Do not make the loading on ditch banks, it can cause a serious accidents. 2. When lifting with a hoist, use the appropriate points to lift. 3. Fasten the moving parts that may get loose...

2. To the operator Working safety standards It is important to have knowledge not only about the functioning, operation of the equipment and its technology, but also the working legal aspects when using the equipment, such as: safety standards, operator's manual and working safety. The equipment and tools used on the rural area must be properly handled, otherwise health and safety of involved personnel may be compromised. The operator must be capable and authorized to operate the tractor, meaning that that person must comprehend the functioning instructions of the tractor and know about the safety...