*myagriexpo

Catalogs
TATU-Marchesan
RO² 1300,1500,1500

RO² 1300,1500,1500

Product catalog summary

Overview: The document provides technical specifications and features of the RO² series belt-driven mounted rotary cutters, specifically models RO² 1300, RO² 1500, and RO² 1700, designed for agricultural use.

Specifications:

Cutting Width: Ranges from 4’ 3” (1,300 mm) to 5’ 7” (1,700 mm) depending on the model.
Number of Blades: Each model is equipped with 2 blades.
Cutting Height: Adjustable from 2” to 6” (40-140 mm).
Tractor Hitching: 3-point lift system.
Blade Tip Speed: Varies from 13,698 ft/min (4,176 m/min) to 17,970 ft/min (5,478 m/min).
Minimum Tractor HP: Ranges from 36 to 60 HP.
Overall Dimensions: Width, length, and height vary by model, with the largest being 6’ 7” (2,000 mm) wide, 8’ 5” (2,575 mm) long, and 3’ 8” (1,120 mm) high.
Weight: Ranges from 1,119 lb (508 kg) to 1,338 lb (607 kg).

Key Features:

DUROMARK blades with enhanced wear resistance.
Vee belts with adjustable belt stretcher for durability.
Free wheel gearbox for extended lifespan.
Heavy-duty 4 mm thick reinforced steel deck with side-sliding skids for height control.
Blades made from spring steel SAE 5160 for longevity.
Standard features include a reinforced frame, adjustable skids, replaceable skid shoes, and a rear wheel support.
Optional adjustable rear wheel for improved height cutting control.

Usage Recommendations: These rotary cutters are intended for agricultural use only, suitable for tasks ranging from mowing grass to heavy brush cutting. They are not to be used near bystanders during operation.

Manufacturer Information: Produced by Marchesan Implementos e Máquinas Agrícolas Tatu S.A., located in Matão, SP, Brazil. The company reserves the right to modify product characteristics without prior notice.

Catalog excerpts

BELT DRIVEN MOUNTED ROTARY CUTTERS

Open the catalog to page 1

Proven in the roughest conditions the RO² 1300, 1500 & 1500 Tatu Rotary Cutters have the required strength to handle jobs from mowing grass on roadsides and around fences to heavy brush cutting. Heavy Duty 4 mm thick reinforced steel deck with side-sliding skids used for height cutting control, the blades shaft is mounted over two tapered roller bearings and protected by retainers. Well balanced blades manufactured from spring steel SAE 5160 for long lasting. The RO² 1300 is suitable for light 540 rpm tractors and perennial crops with reduced spacing. DUROMARK Blades have exclusive manufacturing...

Open the catalog to page 2

RO² 1300,1500,1500

RO² 1300,1500,1500

Catalog excerpts

All TATU-Marchesan catalogs and technical brochures