Foggers Technical Specifications Applications: Used primarily for climate control – Reduction of temp and adding humidity to the air Used for germination, rooting and seedling. Also applicable for humidity controlled environment. Used for reducing high temperature and creating micro climate conditions in greenhouses, chicken coops and animal houses. Foggers- 4 outlets with non- drip Very small droplets allow in air evaporation and Incorporates a vortex design, breaking the water droplet to a fine mist. Three part construction with O-Ring for a tight seal and leak proof Easy maintenance. Technical Specifications Engineering raw materials: Body- Polyester. O-Ring-EPDM. Nominal flow rate at 3.5 bar (51 psi). Operating pressure: 2.5 to 5.5 bar,(36-80 psi). Cover Diameter: 60-120cm,(2-4 Feet). Pattern 360°. Trajectory angle 70° to 100°. Average droplet size 60 to 100 micron,(2.5-4 mil) Installation Spacing defers by application, please consult the product technical page or contact TAVLIT Recommended Filtration: 200 mesh (80 micron). The use of NDV is highly recommended in order to prevent dripping, keep the laterals full and save water. If chemicals and fertilizers (commonly used in agriculture), are implemented, the system should be thoroughly flushed after use with clean water.

Technical Data Metric Units Flow rates (L/H) versus pressure (bar), single head: Nozzle color Nozzle size (micron) Nominal flow rate (L/H) U.S. Units Flow rates (gpm) versus pressure (psi), single head: Nozzle color Nozzle size (micro-inch) Nominal flow rate (gpm)

Performance Charts Metric Units Performance at 1.8 m Height and 3.5 Bar Single Head Nozzle color      Two-way Head Assembly Nozzle color      Four-way Head Assembly Nozzle color     

U.S. Units Performance at 6 Ft Height and 50 psi Single Head Nozzle color      Two-way Head Assembly Nozzle color      Four-way Head Assembly Nozzle color      Application Rate (inch/h