Catalog excerpts
CENTERLINER Models SE, SX, SX C-Tech EASY TO USE • RELIABLE • ACCURAT
Open the catalog to page 1Contents Accu Rate delivery page 1 SX C-Tech Series page 5-6 More from Teagle page 12 Since Teagle Machinery was established over 70 years ago we have designed, built and supported fertiliser spreaders, now manufacturing more machines each year in the UK than anyone else. We remain a family business focussed on meeting the needs of our customers whether just around the corner, or in one of the 35 countries worldwide to which we regularly ship machinery. From the outset, our machinery has been designed to be simple, robust and easy to use. We still stand by these values, with...
Open the catalog to page 2Centerliner Range Centerliner SE, SX and C-Tech precision fertiliser spreaders; designed for farmers with an emphasis on quality, ease of use and accuracy. Teagle promotes the quadruple overlap distribution system. This robust spreading pattern is incredibly tolerant to sources of inaccuracy such as wind, variation in fertiliser characteristics and driver error. Teagle offers a range of fertiliser spreaders that fulfils all European standards relating to accuracy of distribution and border spreading.
Open the catalog to page 3Accu Rate delivery Accurate distribution The bowl system delivers fertiliser direct to the spreading vanes to ensure the drop point does not change even when spreading on hillsides. Accurate dosage The shutter profile achieves an accurate dose both at low and high rates for fertiliser, slug pellets and grass seed. Vortex system Subtle agitation at the base of the bowl sets up a vortex to smoothly spin fertiliser through the shutter without causing damage to the material. Consistent spread To ensure the most consistent spread in the field, each piece of ground receives 16 deliveries...
Open the catalog to page 4WORKING WIDTH The SE Model is ideally suited to smaller acreages with its low weight and robust spread pattern lending it well to hilly conditions. Standard Features: Shutter profile CenterLift boundary tilt system • Stainless steel spreading system • Hydraulic shutter control • CenterLift boundary tilt system • Shear bolt drive line protection • Punch hole sieves • Grass seed/slug pellet agitator • Hopper cover Optional grass seed agitator Punch hole sieves For full specifications please see
Open the catalog to page 5It’s as easy as 1, 2, 3 INER CENTErRLreaders ilise Sp Fert Outstanding UK based support Teagle regularly test the latest fertilisers available in the UK to ensure that you have up-to-date spreading data for your Centerliner. This information is provided with the machine, and is also available online at www.teagle.co.uk If your fertiliser is not listed - just send us a sample and we will provide you with settings. Because you don’t spread in a hall, we don’t test in a hall. All of our spread pattern tests are undertaken in the field to ensure you achieve accurate results, even when...
Open the catalog to page 6WORKING WIDTH The Professionals Choice Engineered to the highest standards the SX is the workhorse of the Centerliner range. Well considered design ensures ease of use at every stage from setting up to washing down, so that SX owners come back time-after-time. Stainless steel spreading Stainless steel rate quadrant Spreading both above and below 18m, fit the optional gear set Standard Features: • Stainless steel spreading system • Hydraulic shutter control • CenterLift boundary tilt system • Slip clutch drive line protection • Road lighting kit • Hopper cover • Mudguards V_ / • Grass...
Open the catalog to page 7The Ultimate in Precision The SX C-Tech brings convenient precision farming to the SX models. The Centronic control system can be integrated with optional Centermatic weigh cells and GPS controlled variable rate systems for absolute accuracy and efficiency. Technology tailored for you As Standard: All SX C-Tech models are equipped with the Centronic control system which automatically adjusts the shutter opening according to the tractor forward speed (DPAE). CENTRONIC Simplified management of your Centerliner Setup of spread parameters, including the Centronic Factor specific to the...
Open the catalog to page 8Pick and Mix Add any combination of the following to your SX C-Tech: On the move weighing Remove the need for calibration or manual rate setting. Variable Rate Control - optional connection Achieve ultimate accuracy irrespective of fertiliser type. Simply enter the desired bout width and application rate to the Centermatic system and the spreader automatically calibrates output on the move. The weighing device is positioned in a close-coupled 'A' frame that fits between the tractor and Centerliner three point linkage. The weight of fertiliser is calculated using a single load cell and a...
Open the catalog to page 9Moving with the times Nigel has run Centerliners for over 20 years, recently upgrading his fourth Centerliner to a C-Tech model with on-board GPS measuring forward speed. Nigel Sheers runs a contract Spraying and Fertiliser Spreading business just outside Leominster, Herefordshire. Each year Nigel spreads around 5000 acres with his SX C-Tech 4000 working at a 24m bout width. Nigel has run Centerliners for over 20 years, recently upgrading his fourth Centerliner to a C-Tech model with on-board GPS providing forward speed. Nigel says that “when moving the machine from tractor to tractor, this...
Open the catalog to page 10Build quality Durability For outstanding durability, stainless steel is used extensively in the spreading components which are driven through a low maintenance driveline. Maintenance Cleaning and maintenance of the spreading system is straightforward thanks to its clean lines, simple construction and ease of access. Finished with care “The quadruple overlap pattern spreads prilled, The hopper and chassis are hand finished before being shot blasted and treated with a double coating of powder paint. granular and urea fertilisers to 24m without any striping, even when conditions are not...
Open the catalog to page 11Quadruple overlap everytime How the quadruple overlap works The inward spinning discs spread fertiliser to the next tramline on both sides of the tractor to create a Quadruple Overlap. Fertiliser is spread to each piece of ground 4 times through the Quadruple Overlap. Choose a spreading system that naturally eliminates errors and produces outstanding results. Resilient Accuracy Wind, driving errors and variation in fertiliser can combine and result in an uneven spread pattern. The gentle taper of the ‘triangular‘ spread pattern produced by the Centerliner distributes any error across the...
Open the catalog to page 12All TEAGLE MACHINERY Ltd. catalogs and technical brochures
-
Super-ted Swath Conditioner
8 Pages
-
FORESTRY MULCHERS
2 Pages
-
MUCK SPREADERS Titan Range
16 Pages
-
XT SERIES Fertiliser Spreaders
12 Pages
-
TOMAHAWK Bale Processor
20 Pages
-
TOMAHAWK Bale Processors
16 Pages
-
THE ULTIMATE BALE PROCESSOR
8 Pages
-
Compact 8
2 Pages
-
XT24 and XT48
12 Pages
-
Super-ted
8 Pages
-
Tomahawk Box Machines
20 Pages
-
Hydraulic top link leaflet
1 Pages
-
A Frame leaflet
2 Pages
-
Mini-Garden Flail Mower
1 Pages
-
Topper4 Pasture Topper
1 Pages