Forestry crane for wood, 360° rotation with return mod. FORESTAL PATENTED SYSTEM The forestry crane (patented system) is used mainly for lifting and handling of timber. It can be assembled on a transporter, two-wheeled tractors (Caron, Carraro, Goldoni), chippers and tractors, even with small engines, with three-point hitches. The cranes are designed to allow movement of materials at a substantial height. This crane is controlled directly via the commands positioned in from of the operator’s seat. Thanks to the special structure of the arms, it is possible to use the entire lorry body, even the part nearest the crane, where other loaders are inefficient Tco ca i S . en mecn a .. c r l Va° gi 5 - 0 3 C sldMaz ( ) iIMag ,6 1 0 5 aa i zèT o e O Tl 3 0 1 8 0 7 - a + 9 1 9 3 7 6 e + 9 1 9 3 7 6 Fx 3 0 1 8 0 7 . w wtco cn i fr at w . n mea n aomii e c

TECHNICAL DATA Arm length - to grab center (mm) 1° Arm length (mm) 2° Arm length (mm) Weight (Kg) Max weight / Max Load (senza pinza e rotore a 210 bar) Max weight 1°arm (kg) Max weight 2°arm (kg) MAX height (mm) Minimum required tractor Central rotation Unlimited grab rotation Arms Sliding hydraulic arms Sliding hydraulic arm length (mm) Weight 1°Sliding hydraulic arms (kg) Grab Type ACCESSORIES Excavation Kit Independent hydraulic system Seat Supplemental G3 step-up gear unit with power drive through shaft Central seat Lateral seat Hydraulic arm Joystick Tow kit not approved for the road Tco...

Double pump to connect to joystick Un-proportional radio control O = optional / S = standard / – = not available. "central column" system, Forestry crane- TFC4200 FORESTAL In order to maintain balance during operation and when the machinery is at a halt during road transfers, these loaders have been engineered with a "central column" system, with the central axis fitted in the middle. This system avoids jolts or the tractor from turning over, when driving up-hill or down-hill. The TFC3000 / TF C3500 / TFC 4200 / TFC5100/TFC6000 FORESTAL loaders are mainly used for timber lifting and handling....

Assembly on power hoes: • CARON INDUSTRIAL VEHICLES They can be fitted to the frame behind the cabin (keeping the loading bucket free on three sides), or behind the loading bucket (with the possibility of tipping it on either sides). The loader is easily removed by pulling out the bolt (behind the loading bucket). BIO-CHOPPERS SUPPORT FEET All models are equipped with large support feet which make easier the fixing and releasing of the loader, and give the required stability during operation. The TFC4200 - 5100 FORESTAL models have pivot-opening leveling jacks. The TF C3000- 3500 FORESTAL models...

OVER-CENTER valves regulating and making smoother the descent speed. Tco ca i S . en mecn a .. c r l Va° gi 5 - 0 3 C sldMaz ( ) iIMag ,6 1 0 5 aa i zèT o e O Tl 3 0 1 8 0 7 - a + 9 1 9 3 7 6 e + 9 1 9 3 7 6 Fx 3 0 1 8 0 7 . w wtco cn i fr at w . n mea n aomii e c . Powered by TCPDF (www.tcpdf.org)