GB with threaded flange Analog Magnetostrictive Linear Position Sensors I Sensor element and electronics can be changed I Flat & compact sensor electronics housing I Electrical connection is freely rotatable

Temposonics® GB with threaded flange Analog Data Sheet MEASURING TECHNOLOGY The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide....

Data Sheet Voltage 0...10 VDC and 10...0 VDC (minimum load controller: > 5 kQ) Current 4(0)...20 mA or 20.4(0) mA (minimum/maximum load: 0/500 Q) Programming Programming of set points using optional accessories Measured value Position 1/ The internal digital value is measured through a 16-bit D/A converter and transferred into a proportional, analog current or voltage signal. 2/ With position magnet # 251 416-2 3/ For option H ( -40...+100 °C /-40...+212 °F) an aluminum cover plate is used

Magnet Magnet Temposonics® GB with threaded flange Analog Data Sheet TECHNICAL DRAWING Threaded flange »M«: Threaded flange »M«: M18×1.5-6g M18×1.5-6g M12 male connector (example: With flat-faced flange) Stroke length Stroke length 25…3250 25…3250 (1…128) (1…128) Dead zone Dead zone 63.5 63.5 (2.5) (2.5) Magnet Magnet Sensor electronics Sensor electronics housing housing 39 39 (1.54) (1.54) Threaded flange »M«: Threaded flange »M«: M18×1.5-6g M18×1.5-6g M16 male connector (example: With raised-faced flange) Dead zone Dead zone 63.5 63.5 (2.5) (2.5) Stroke length Stroke length 25…3250 25…3250...

Data Sheet (A coded) Output Pin Voltage Current */ Connect the first output to DC Ground (0 V), if you only use the second output. Fig. 7: Connector wiring cable outlet for outputs V0, A4 HXX/TXX/VXX (for outputs: A0, A1, A2, A3 in order code) Fig. 8: Connector wiring cable outlet for outputs A0, A1, A2 and A3

Temposonics® GB with threaded flange Analog Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Catalog Position magnets Ring magnet OD33 Part no. 201 542-2 Ring magnet OD25.4 Part no. 400 533 Ring magnet OD17.4 Part no. 401 032 Material: PA ferrite GF20 Weight: Approx. 11 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite GF20 Weight: Approx. 14 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F)...

Data Sheet M12 A-coded female connector (4 pin/5 pin), straight Part no. 370 677 M12 A-coded female connector (5 pin), angled M16 female connector (6 pin), straight M16 female connector (6 pin), angled Termination: Screw Contact insert: CuZn Operating temperature: Ingress protection: IP67 (correctly fitted) Fastening torque: 0.6 Nm Termination: Screw Contact insert: CuZn Wire: max 0.75 mm2 (18 AWG) Operating temperature: Ingress protection: IP67 (correctly fitted) Fastening torque: 0.4 Nm Material: Zinc nickel plated Termination: Solder Cable 0: 6.8 mm (0.24.0.31 in.) Operating temperature: -40.+100...

Temposonics® GB with threaded flange Analog Data Sheet Programming tools Hand programmer for analog output Part no. 253 124 Cabinet programmer for analog output Programming kit Part no. 253 408 Part no. 254 555 Easy teach-in-setups of stroke length and direction on desired zero/span positions. For sensors with 1 magnet. Features snap-in mounting on standard DIN rail (35 mm). This programmer can be permanently mounted in a control cabinet and includes a program/run switch. For sensors with 1 magnet. Kit includes: 1 × interface converter box 1 × power supply 1 × cable (60 cm) with M12 female connector...

Data Sheet ORDER CODE GB-M/GB-T: Sensor Accessories have to be ordered separately. Manuals, Software & 3D Models available at: www.temposonics.com

UNITED STATES Document Part Number: 551838 Revision D (EN) 10/2024 Americas & APAC Region Phone: +1 919 677-0100 E-mail: [email protected] Temposonics 58513 Lüdenscheid GmbH & Co. KG Phone: +49 2351 9587-0 EMEA Region & India E-mail: [email protected] ITALY Phone: +39 030 988 3819 Branch Office E-mail: [email protected] FRANCE Phone: +33 6 14 060 728 Branch Office E-mail: [email protected] UK Phone: +44 79 21 83 05 86 Branch Office E-mail: [email protected] SCANDINAVIA Phone: + 46 70 29 91 281 Branch Office E-mail: [email protected] CHINA Phone: + 86 21 3405...