Data SheetGTE Analog Magnetostrictive Linear Position Sensors I Offers redundancy for Enhanced Safety Applications (ESA) I Embeddable for added protection in harsh environments I ATEX- / lECEx- certifi cation (optionally)

Temposonics® GTE Analog ATEX / NEC / CEC Data Sheet MEASURING TECHNOLOGY The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This...

Data Sheet (minimum controller load: > 5k Q) Measured value Position Resolution: Position Cycle time Linearity deviation Repeatability Hysteresis Infinite (restricted by output ripple) Operating conditions Operating temperature Humidity Ingress protection Shock test Vibration test EMC test Operating pressure 90 % relative humidity, no condensation IP64 100 g (single shock) according to IEC 60068-2-27 (survivability) 10 g/10.2000 Hz according to IEC60068-2-6 (resonance frequencies excluded) Electromagnetic emission according to EN 61326-1 and EN 55011 Electromagnetic immunity according to EN 61326-1...

CERTIFICATIONS Certification required IECEx / ATEX (IECEx: Global market; ATEX: Europe) Class I/II/III Div 2 T4 Groups ABCDEFG Class I, Zone 2, AEx nA IIC T4 Class II/III, Zone 22, AEx tc IIC T130 °C –20 °C ≤ Ta ≤ +75 °C (−4 °F ≤ Ta ≤ +167 °F) Class I/II/III Div 2 T4 Groups ABCDEFG Ex nA IIC T4 Gc Ex tc IIC T130 °C Dc –20 °C ≤ Ta ≤ +75 °C (−4 °F ≤ Ta ≤ +167 °F) TECHNICAL DRAWING GTE Analog TPV cable, part no. 530 162 bending radius: 5 × D Fig. 4: Temposonics® GTE with ring magnet Controlling design dimensions are in millimeters and measurements in ( ) are in inches 4 Sensor electronics housing...

Temposonics® GTE Analog ATEX / NEC / CEC Data Sheet CONNECTOR WIRING BXX Signal + power supply Cable Signal ground Supply voltage Shield Only connected on controller side Fig. 5: Connector wiring FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Guide Magnet spacer Position magnets Ring magnet OD33 Part no. 201 542-2 Ring magnet OD25.4 Part no. 400 533 Magnet spacer Part no. 400 633 Material: PA ferrite GF20 Weight: Approx. 11 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite...

Sensor model d Operating voltage GTE Embedded pressure-fit flange 0 60 mm (2.36 in.) Output Stroke length Standard stroke length (mm) Ordering steps Standard stroke length (in.) Ordering steps Non-standard stroke lengths are available; must be encoded in 5 mm/0.1 in. increments. Agency approval Connection type DELIVERY B 0 1 1 m/3 ft. TPV cable (part no. 530 162) • Sensor Accessories have to be ordered • O-ring separately. • Back-up ring Manuals, Certificates, Software & 3D Models available at: www.temposonics.com

UNITED STATES Temposonics, USA LLC MTS Systems Corporation Americas & APAC Region Sensors Division Amerika & APAC Region GERMANY DEUTSCHLAND Temposonics MTS Sensor GmbHTechnologie & Co. KG KG EMEAGmbH Region&&Co. India EMEA Region & Indien ITALIEN Branch Office Zweigstelle 3001 Sheldon Drive 3001N.C. Sheldon Drive Cary, 27513 Cary, N.C. 27513 677-0100 Phone: +1 919 Telefon:[email protected] +1 919 677-0100 E-mail: E-Mail: [email protected] Auf dem Schüffel 9 Auf dem Schüffel 9 58513 Lüdenscheid 58513 +49 Lüdenscheid Phone: 2351 9587-0 Telefon:[email protected] +49 2351 9587-0...