L-Series An alog + Digital Magnetostrictive l^inej^r Position Sensors A Compact Sensor for Hydro Cylinders • Absolute Sensor • Non-contact Measurement • Modular Construction • Stable Design • Highest Durability • Direct Analog Output (V/mA): 100% field adjustable • Digital Pulse Output, Start-Stop

Analog + Digital Displacement ~ Time The absolute Temposonics linear position sensors are based on the Temposonics developed magnetostrictive measurement principle. That combines various magneto-mechanical effects and uses the physical hight precise speed-measurement of an ultrasonic wave (torsion pulse in its sensor element) for position detecting. The integral signal processing transforms the measurements into analogue or digital standardized outputs. The contactless principle - an external movable magnet marks the position eliminates the wear, noise and erroneous signal problems and guarantees...

The compact position sensor system was designed for installation in hydraulic cylinders, specifically for use in standard clevis head cylinders or any space limited cylinder applications. • The pressure proof stainless steel sensor rod with fitting or threaded flange protects the sensing element in which gives rise to the measurement signal. It fits into the bored piston rod. • The external standard industrial housing accomodates the modular electronic interface with active signal conditioning. The sensor electronic is connected to the basicsensor via inside terminal screws and to the controller...

Temposonics® LD Analog + Digital Analog Output Temposonics® LD sensors provide direct analog outputs, including voltage (0-10 V) and current (4-20 or 0-20 mA), forward and reverse acting. Resolution is only limited by the output ripple. Since the outputs are direct, no signalconditioning electronics are needed when interfacing with controllers or meters. Digital Start/Stop pulse Digital LD sensor is equipped with a start/stop output. The sensor requires a start signal from an external indicator in onsite control system and returns a signal, corresponding to the magnet position. The time elapsed...

Temposonics® LD is designed for installation into hydraulic cylinders. Mounting of a LD sensor requires the use of a O-ring (black) and a backup-ring (orange). Both are supplied with the sensor. The sensor will be fixed via suecial screw. Interconnection cable When mounted in the manner as shown below, interconnection cable is shielded according to EMC standard at the cylinder end cap. However, when the LD sensor is mounted in an alternative way, proper care must be taken to shield the interconnection cable. • Magnet must not slide along the sensor tube. • The bore in the piston rod and type...

Sensor Electronics Housing Customer Cable to Control unit Pigtailed Option: Connector Terminal Colour Function 9 brown V in Screw black Frame GND 1. Start/Stop Output Terminal Colour Function A For side entry housing connect skield on EMC cable gland male insert 2. Analog Output Terminal Colour 1 white DC Ground PC Programmer only 0-10, 10-0 V, male insert A Wiring of 10-0 V and 20-4(0) mA outputs is valid for LD sensors from fabrication # (F-No.) 0546 xxxx. Typical Grounding Electronic enclosure Machine ground Pressure housng = Machine ground Internal Electronics Cover = DC Ground (Ov) isolated...

Temposonics® LD Sensor rod style_| S - Fiting flange (with housing »B« only) M - Threaded flange (with housing »S« only) Magnete und Zubehor bitte extra bestellen. Sensor electronic housing style_ B - Bottom cable entry S - Side cable entry D6 - Cable with 6 pin male connector 02 - 2 meters, Standard 01-10 - 01 up to 10 meters (up to 1000 mm in 50 mm steps; up to 5000 mm in 250 mm steps; Option: In 5 mm steps) Mating female connector M16 u- 58 -. 6 pin DIN male connector Part No. 370 372 Housing: Zinc, nickel plated Termination: Solder Contact insert: Silver plated Cable clamp: PG 7 Cable-0:...

UNITED STATES Americas & APAC Region Phone: +1 919 677-0100 E-mail: [email protected] Document Part Number: 05012010e Temposonics 58513 Lüdenscheid GmbH & Co. KG Phone: +49 2351 9587-0 EMEA Region & India E-mail: [email protected] ITALY Phone: +39 030 988 3819 Branch Office E-mail: [email protected] FRANCE Phone: +33 6 14 060 728 Branch Office E-mail: [email protected] UK Phone: +44 79 21 83 05 86 Branch Office E-mail: [email protected] SCANDINAVIA Phone: + 46 70 29 91 281 Branch Office E-mail: [email protected] CHINA Phone: +86 21 2415 1000 / 2415 1001 Branch...