Data Sheet R-Series V RM5 Analog Magnetostrictive Linear Position Sensors Super shield housing with IP68/IP69 against ingress of dust and water Direct analog output, position + speed Dual magnet position measurement

Temposonics® R-Series V RM5 Analog Data Sheet MEASURING TECHNOLOGY Position magnet (magnetic field) 2 The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and a supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse...

Data Sheet Analog Voltage: 0...10 /10...0/-10...+10/+10...-10 VDC (min. controller load > 5 kQ) Current: 4(0)...20/20...4(0) mA (min./max. load 0/500 Q) Measured output variables Position for one or two position magnets Position + speed (without direction) or velocity (with direction) for one position magnet Position for one position magnet + temperature inside the sensor electronics housing Null/Span adjustment 100 % of electrical stroke Resolution 16 bit (internal resolution 0.1 pm) Linearity deviation 1 < ±0.01 % F.S. (minimum ±50 pm) 1/ With position magnet # 251 416-2

Temposonics® R-Series V RM5 Analog Data Sheet TECHNICAL DRAWING RM5-M/S – RM5 with threaded flange M18×1.5 or ¾"-16 UNF-3A, example: Connection type HXX / RXX / TXX (cable outlet) Sensor electronics housing 170 (6.7) Threaded flange »M«: M18×1.5-6g Threaded flange »S«: ¾"-16 UNF-3A * Stroke length > 5000 mm (196.9 in.) Controlling design dimensions are in millimeters and measurements in ( ) are in inches Fig. 2: Temposonics® RM5 with ring magnet STRUCTURE The RM5 Analog consists of (Fig. 3) Super shield housing R-Series V sensor with connector outlet (connection type D34) Cable for direct connection...

Temposonics® R-Series V RM5 Analog Data Sheet CONNECTOR WIRING HXX / RXX / TXX Signal + power supply Cable Output Color Function 1 Signal Ground Position (magnet 2) or reverse position (magnet 1) or speed or velocity (magnet 1) or temperature inside the sensor electronics housing GN Signal Ground BN +12…30 VDC (±20 %) WH DC Ground (0 V) * order dependent For cable type TXX, the extra red & blue wires are not used. Fig. 4: Connector wiring HXX/RXX/TXX

Temposonics® R-Series V RM5 Analog Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Catalog Ring magnet OD33 Part no. 201 542-2 Ring magnet OD25.4 Part no. 400 533 Ring magnet Part no. 402 316 Material: PA ferrite GF20 Weight: Approx. 11 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite GF20 Weight: Approx. 14 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite Weight: Approx....

Data Sheet M12 A-coded female connector (4 pin/5 pin), straight Part no. 370 677 Material: PVC jacket; gray Features: Twisted pair, shielded, Cable 0: 6 mm (0.23 in.) Cross section: 3 x 2 x 0.14 mm2 Bending radius: 10 x D (fixed installation) Termination: Screw Contact insert: CuZn Operating temperature: Ingress protection: IP67 (correctly fitted) Fastening torque: 0.6 Nm Material: PUR jacket; orange Features: Twisted pair, shielded, highly flexible, halogen free, suitable for drag chains, mostly oil & flame resistant Cross section: 3 x 2 x 0.25 mm2 Bending radius: 5 x D (fixed installation)...

Temposonics® R-Series V RM5 Analog Data Sheet Extension cables PVC cable with M12 female connector (6 pin), straight – pigtail PUR cable with M12 female connector FEP cable with M12 female connector (6 pin), straight – pigtail (6 pin), straight – pigtail PVC cable (part no. 530 032) with M12 female connector, straight (part no. 370 677) PUR cable (part no. 530 052) with M12 female connector, straight (part no. 370 677) FEP cable (part no. 530 112) with M12 female connector, straight (part no. 370 677) Order code: K2-A-370677-xxxxyy-530032-0 (where xxxx = cable length and yy = unit in centimeters...

Temposonics® R-Series V RM5 Analog Data Sheet ORDER CODE Ordering steps Standard stroke length (in.) Non-standard stroke lengths are available; must be encoded in 5 mm/0.1 in. increments. |R Position and speed (1 magnet and 2 outputs) Specify the maximum speed value in section Q |R Position and velocity (1 magnet and 2 outputs) Specify the maximum velocity value in section Q [R Position and reverse position (1 magnet and 2 outputs) 5 Position and temperature inside the sensor electronics housing (1 magnet and 2 outputs) 6 Differential (2 magnets and 1 output)

Temposonics® R-Series V RM5 Analog Data Sheet k Output range 0 0…10 VDC or 4…20 mA 1 10…0 VDC or 20…4 mA 2 −10…+10 VDC or 0…20 mA 3 +10…−10 VDC or 20…0 mA V 0…10 VDC for position, −10…+10 VDC for velocity l Max. speed or velocity value (optional: use when For metric stroke lengths encode speed or velocity in m/s for the values 0.01 to 9.99 m/s (001…999) For US customary stroke lengths encode speed or velocity in inches/s for the values 1 to 400 in./s (001…400) To get a speed or velocity output of 0.025 m/s or 10 m/s for the R-Series V Analog, enter code (00E) for 0.025 m/s or (A00) for 10.0 m/s...

Temposonics® R-Series V RM5 Analog Data Sheet GLOSSARY A Analog output For a sensor with analog output, the measured value is output as an analog voltage signal or current signal. D Differential For differential measurement, the distance between the two position magnets is output as a value. ( multi-position measurement) M Max. speed or velocity value For speed or velocity, the output value generated is scaled based on the maximum speed or velocity value indicated in the order code. Measuring direction • Forward: Values increasing from sensor electronics housing to rod end/profile end • Reverse:...