R-Series V RP5 PROFINET IO RT & IRTMagnetostrictive Linear Position Sensors I Minimum position resolution 0.5 pm I Position and velocity measurements for up to 30 magnets I Field adjustments and diagnostics using the new TempoLink® smart assistant

Temposonics® R-Series V RP5 PROFINET IO RT & IRT Data Sheet MEASURING TECHNOLOGY Position magnet (magnetic field) The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current...

Data Sheet Output Interface Data protocol Data transmission rate Measured value PROFINET RT PROFINET IRT version 2.3 MTS Profile and Encoder Profile V4.2 100 MBit/s (maximum) Position, velocity/option: Simultaneous multi-position and multi-velocity measurements up to 30 magnets Measurement parameters Stroke length Optional internal linearization: Linearity tolerance (Applies for the first magnet for multi-position measurement) Stroke length 25...300 mm 300...600 mm 600...1200 mm 1200...3000 mm 3000...5000 mm 5000...6350 mm Resolution: Position Cycle time 1/ With position magnet # 252 182

Temposonics® R-Series V RP5 PROFINET IO RT & IRT Data Sheet TECHNICAL DRAWING RP5-M-A/-V, example: Connection type D58 (connector output) 5 Sensor electronics (0.2) Null zone housing 28 58 17 (1.1) (2.28) (0.67) Adjustable mounting clamp Stroke length 25…6350 (1…250) Magnet Controlling design dimensions are in millimeters and measurements in ( ) are in inches Fig. 3: Temposonics® RP5 with U-magnet M12 female connector (D-coded) M12 female connector (D-coded) M12 female connector (D-coded) Power supply M12 male connector (A-coded) Port 2 – Signal M12 female connector (D-coded) View on sensor Fig....

Temposonics® R-Series V RP5 PROFINET IO RT & IRT Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Guide Position magnets Magnet slider S, joint at top Part no. 252 182 Magnet slider V, joint at front Part no. 252 184 Magnet slider N longer ball-joint arm Part no. 252 183 Magnet slider G, backlash free Part no. 253 421 Material: GRP, magnet hard ferrite Weight: Approx. 35 g Operating temperature: −40…+85 °C (−40…+185 °F) Material: GRP, magnet hard ferrite Weight: Approx. 35 g Operating temperature: −40…+85 °C (−40…+185 °F) Material: GRP, magnet hard ferrite...

Data Sheet M12 D-coded male connector M12 connector end M12 A-coded female connector M8 female connector (4 pin), straight (4 pin/5 pin), straight Part no. 370 504 Material: Zinc nickel-plated Termination: Insulation-displacement Cable 0: 5.5...7.2 mm (0.2...0.28 in.) Wire: 24 AWG - 22 AWG Operating temperature: Ingress protection: IP65 / IP67 (correctly fitted) Female connectors M12 should be covered by this protective cap Material: Brass nickel-plated Ingress protection: IP67 (correctly fitted) Fastening torque: 0.39.0.49 Nm Termination: Screw Contact insert: CuZn Operating temperature: Ingress...

Temposonics® R-Series V RP5 PROFINET IO RT & IRT Data Sheet PVC power cable Part no. 530 108 Power cable with M8 female connector (4 pin), straight – pigtail Part no. 530 066 (5 m (16.4 ft.)) Part no. 530 096 (10 m (32.8 ft.)) Part no. 530 093 (15 m (49.2 ft.)) Material: PVC jacket; gray Features: Shielded, flexible, mostly flame resistant Cable Ø: 4.9 mm (0.19 in.) Cross section: 3 × 0.34 mm² Bending radius: 10 × D Operating temperature: −30…+80 °C (−22…+176 °F) Material: PUR jacket; gray Features: Shielded Cable Ø: 8 mm (0.3 in.) Operating temperature: −40…+9

Data Sheet ORDER CODE • Select the MTS profile (U402 or U412) in ^“Output” for multiposition measurement. • For RP5, the magnet selected in b|“Design” is included in the scope of delivery. Specify the number of magnets for your application. For multi-position measurements with more than 1 magnet order the other magnets separately. • The number of magnets is limited by the stroke length. The minimum allowed distance between magnets (i.e. front face of one to the front face of the next one) is 75 mm (3 in.). • Use magnets of the same type for multi-position measurement, e.g. 2 x U-magnet (part...

Temposonics® R-Series V RP5 PROFINET IO RT & IRT Data Sheet Encoder Profile The encoder profile corresponds to the specification of the encoder profile V4.2 (PNO no. 3.162). With this profile, the position and the velocity of one magnet can be measured and transferred simultaneously. ( MTS Profile) Extrapolation The native measurement cycle time of a sensor increases with the stroke length. With extrapolation, the sensor is able to report data faster than the native cycle time, independent of the stroke length of the sensor. Without extrapolation, if data is requested faster than the native cycle...

UNITED STATES 3001 Sheldon Drive 3001 Sheldon UNITED STATES N.C. 27513Drive Temposonics, LLC Cary, Cary, +1 N.C. 27513 MTS Systems Corporation Phone: 919 677-0100 Americas & APAC Region Phone: +1 919 677-0100 Sensors Division E-mail: [email protected] Document Part Number: Document Part Number: 551961 Revision B (EN) 03/2021 Americas & APAC Region E-mail: [email protected] GERMANY Auf dem Schüffel 9 Auf dem Schüffel 9 GERMANY 58513 Lüdenscheid Temposonics 58513 Lüdenscheid MTS Sensor Technologie GmbH & Co. KG Phone: +49 2351 9587-0 Phone: +49 2351 9587-0 [email protected] EMEAGmbH...