DRP System ® AUTOMATIC LOADER HITCH It regulates the pressure of hydraulics cylinders avoiding over pressures and unexpected breakages. AUTO LUBRICANT BUSHINGS IN EACH JOINT DRC System ® AUTOMATIC HITCH FOR IMPLEMENTS Bushings in each joint, with greasers in the most problematic areas, ensure the sustainability of the whole. Fast hydraulic plugging with flat tips allowing more cleanliness and plugging with residual pressure. OPTIONS AH System ® SHOCK ABSORBER A good contort is obteined for the user as well as protection for all components during transport. SERVICE LINE FOR HYDRAULIC IMPLEMENTS...

DON'T CONTAIN - Buckets - Forks CONTAIN - Adaptation - Arms - Hydraulic installation (Electrovalve, Distribuitor or tractor remote control) - All elements for work (Cylinders, Hoses, Connections,.. etc.) - DRB standard. NOTE: Mesures given can vary according to the tractor model. I Start-up power J Payload at 2,00 mts. K At max. height

ilLOG GRIP l| HYDRAULIC MANURE FORK WIDTH (mm) CAPACITY (liters)

PELICAN BUCKET WIDTH (mta) ALLOWED WEIGHT (Kqs> Side Dump option STANDARD BUCKET WIDTH (mta) High-tip option WRAPPED ROUND BALES GRIP (economic) WRAPPED ROUND BALES GRIP WIDTH (mts)

OBSERVATIONS 1 - Specify exhaust pipe type (from bottom up, from top to bottom, side). 2 - Fixed or folding safety arch. 4 - Specify wheel measures. 5 - Specify front axle type. 6 - Specify if the tractor has front suspension. 7 - With original three-point, fit an upper arm. 9 - Specify if the tractor has a cab of origin. 12 - Indicate the position of the diesel cap. 13 - Specify if the tractor has an auxiliary tank. 19 - Shock adsorber is compulsory. 22 - Specify motor type. 23 - The specifiled load

BUSINESS NETWORK HIES ERANClW OC E A N I Al EXPORT AMERICA / ASIA / OCEANIA Contact: Sergio Alonso Tels: +34 983 33 80 99 Fax: +34 983 37 71 60 Movil: +34 690 13 30 10 e-mail: [email protected] HEAD OFFICE AND FACTORY Pol. Ind. Valdeferrin, c/3 - Pcla. 91 50600 EJEA DE LOS CABALLEROS (Zaragoza-Espafia) Tel. +34 976 67 71 50 Fax +34 976 66 12 15 e-mail: [email protected] - www.tenias.com Authorized dealer FABRICA Y OFICINAS CENTRALES Pol. Ind. Valdeferrin, c/3 - Pcla. 91 50600 EJEA DE LOS CABALLEROS (Zaragoza-Espana) Tel. +34 976 67 71 50 Fax +34 976 66 12 15 e-mail: [email protected] - WWW.tenias.com...