WELCOME TO THE WORLD OF TERMOLECNO
20Pages

DRYING KILNS WITH HEART, FOR THE EARTH

For years, the companies in the woodworking sector are often considered as negative market actors in various environmental debates relating to deforestation. All this has also been caused by incomplete or partial information on behalf of the mass media or even by employees themselves. It is evident that the environmental balance of our planet is fragile. Today, an inattentive management of the global forest heritage requires all employees to pay the utmost attention to the importance of making production decisions that are also capable of respecting the environment as much as possible. In...

CONVENTIONAL DRYING KILNS Among our range of products, the front-loading drying kilns are undoubtedly the most popular. Just like all Termolegno cells, they have an entirely independent 6063 T66 aluminium alloy load-bearing structure with a 2,500 Kg/cm2 ultimate tensile strength, while its walls are made of a 5754 aluminium-magnesium peraluman alloy with excellent characteristics relating to its resistance to oxidation and tannin-based corrosion. ► 1. The ventilation system consists of 1 -speed reversible helical electric fans (or in the case of variable-speed inverters) with die-cast...

TUNNEL DRYING KILNS Where drying cycles are short and the loading/unloading times affect the cost of the product, tunnel drying kilns could be adopted and which allow loading and unloading in both directions. The loading of the cell can be carried out by means of a fork-lift truck or by rail-mounted carriages, these allow a continuous cycle or rather, while the cell is involved in a drying cycle, the operators can prepare the next load and unload the one that has just been dried. Ventilation always consists of reversible helical electric fans with die-cast aluminium axial fans yet situated...

The pre-drying kiln is an excellent solution for companies with large quantities of timber to be treated and it is a perfect alternative to seasoning and outdoor storage. This system enables a calm process relating to the reduction of humidity in freshly-sawn timber. What are the advantages? • Eliminating defects caused by seasoning such as collapsing and/or splits • Reducing warehouse storage costs • Minimising final drying times • Increasing flexibility con one's own customers The structure is always made to measure and is sized according to the geographic area of installation; it can be...

ISPM1S HT HEAT TREATMENT DRYING KILNS Standard ISPM-15 for wooden packaging material foresees TREATMENT, a necessary stage to be able to bear the IPPC/FAO brand in compliance with necessary requirements. In accordance with standards and indications provided by the European Union, the only treatment methodology recognised as from 2010 is Heat Treatment (code: "HT"). Such activity is carried out using front-loading or tunnel drying kilns equipped with HT KIT for heat treatment that consists in software and a series of Temperature probes. The treatment cycle consists of 3 stages: ► Heating:...

Purchasing and managing costs are significantly lower with drying kilns powered by burners ^S'////////

STEAMING CELLS Steaming systems are always made to measure and consist of watertight cells insulated with materials that are resistant to high temperatures, inside which it is possible to recreate a saturated steam environment in which the wood is exposed to high temperatures and a high humidity rate. Such technologies activate a transformation of the wood cells, by generating a change of its colour and enabling a more efficient management of the wood steaming process. Steam is generated in two ways: ► Directly using boilers to generate steam ► Indirectly using heat exchangers immersed in...

The combined steaming and drying cells considerably reduce material handling costs and optimising consumption during the wood treatment process. The Termolegno control unit makes it possible to combine the steaming and the drying cycle into a single programme. Steaming can be carried out in two ways: ► Directly using boilers to generate steam ► Indirectly using heat exchangers immersed in specific watertanks that cause evaporation. The heat exchangers can be powered by super-heated water boilers, steam, heat transfer oil or burners fuelled by diesel oil, methane or LPG. Once the steaming...

TURNKEY SYSTEMS Termolegno designs and manufactures wood treatment systems complete with a biomass boiler and a hydraulic system or with a gas/diesel oil burner.

ELECTRONICS The world of drying is an extremely complex, electronics and software have the task of simplifying it and making it accessible to anyone. Our New 6800 control units, especially if combined with RX software that has graphics that are both animated and visible in real-time, make all operations very straightforward. The RX software can handle up to 32 drying kilns simultaneously and even remotely, to be connected to TERMOLEGNO SUPPORT to make the most of the assistance of a specialised Termolegno technician. The electronics have been designed to be versatile, by providing the...

SOME OF THE POSSIBLE CUSTOMISATIONS: 1. False-ceiling walkways or sliding false-ceiling for fan maintenance 2. Aluminium or EPDM rubber false-ceiling deflectors 3. A roof access ladder 4. Aluminium or EPDM rubber side deflectors 5. Longitudinally-sliding loading door, sliding along either the right or the left side as well as a hinged loading door

6. Loading door rail protection 8. Bidirectional forced expulsion of saturated air with or without heat recovery units • Single or dual-stage, low or high-pressure humidification or with a steaming tank • Fixed or variable speed ventilation controlled by an inverter

CUSTOMER CARE ► Remote support: • Remote technical support • Drying program consultancy service • Software updating ► On-site technical support ► Spare parts service ^ Termolegno contacts: Tel.: +39 0427 94190 Email: support@termolegno.com 1. Download and install the program “Support_Termolegno.exe" 1. You will get ID and password to be communicated to our Assitance