DIRECT HEATING
8Pages

{{requestButtons}}

Catalog excerpts

DIRECT HEATING - 1

DIRECT AIR HEATERS FOR AGRICULTURAL APPLICATIONS

Open the catalog to page 1
DIRECT HEATING - 2

DIRECT GAS-FIRED AIR HEATER The air heater agriTERM was developed for livestock buildings. It is entirely made of stainless steel for the maximum corrosion resistance in aggressive environments. The direct flame guarantees maximum efficiency: agriTERM produces low emissions of Nox and Co in the atmosphere resulting in a limited environmental impact. This product can run both on LPG or natural gas. 4 secure suspension eyes included Remotable reset button Thermostat socket Practical gas/electric connections Safety thermostat with manual reset

Open the catalog to page 2
DIRECT HEATING - 3

Thermic power Technical features Power supply Power consumption Noise level at 1 m LPG Methane LPG Methane Nox min-max CO min-max Voltage Frequency* Current *60Hz version available upon request. **Different depending on the country of installation. Notes: The country of destination is to be specified for each order. The standard air heater is preset for methane consumption. In case of LPG consumption it is necessary to use the LPG kit (supplied in the same box). Dimensions and loading possibilities Model agriTERM 25 agriTERM 40 agriTERM 65 agriTERM 90 Loading possibilities on pallet Loading...

Open the catalog to page 3
DIRECT HEATING - 4

Technical features The air heater agriTERM was developed for livestock buildings. It is entirely made of stainless steel for the maximum corrosion resistance in aggressive environments. The direct flame guarantees maximum efficiency: agriTERM produces low emissions of Nox and Co in the atmosphere resulting in a limited environmental impact. This product can run only on LPG. Available only for extra EU markets. Model agriTERM 125 Thermic power Air displacement Consumption at 1013 mbar/ 15°C Gas pressure Emissions in the atmosphere Power supply Power consumption Noise level at 1 m Nox min-max...

Open the catalog to page 4
DIRECT HEATING - 5

The air heater easyTERM was developed for big structures. The double-wall housing in galvanised steel treated with zinc-magnesium guarantees high corrosion resistance and better protection of the surfaces located in very aggressive environments. Therefore it can be installed either inside or outside the building. Its installation is quick and its maintainance is easy: the inside of the machine can be conveniently inspected by opening a small door. The machine can be activated manually, by a thermostat or by an integrated control system. Tested and proven control and safety systems The...

Open the catalog to page 5
DIRECT HEATING - 6

Technical features and dimensions Technical features Loading possibilities on pallet TEHMDTECNICP PEPICDLI

Open the catalog to page 6
DIRECT HEATING - 7

A wide variety of applications All data in this catalogue are indicative and are subject to change without prior notice.

Open the catalog to page 7
DIRECT HEATING - 8

TEHMDTECNICn PEPICDLI Release - July 2023 TERMOTECNICA PERICOLI S.r.l. Regione Rapalline, 44 - 17031 Albenga, Italia tel. 0182 589006 fax 0182 589005 pit@pericoli.com PERICOLI ASIA PACIFIC Sdn. Bhd. pap@pericoli.com PERICOLI CENTRO AMERICA pca@pericoli.com PERICOLI MIDDLE EAST pme@pericoli.com PERICOLI INDIA Pvt. Ltd. pin@pericoli.com pericoli.com 00 pUnlcon 00 PSRIcool are registered trademarks by Termotecnica Pericoli S.r.l.

Open the catalog to page 8

All TERMOTECNICA PERICOLI S.R.L. catalogs and technical brochures

  1. PLAScool

    4 Pages

  2. PLAScool HE

    4 Pages

  3. ACF 21p

    2 Pages

  4. G-LINE

    8 Pages

  5. ACCESSORIES

    12 Pages

  6. COOLING

    12 Pages

  7. EXHAUST FANS

    12 Pages