DIRECT AIR HEATERS FOR AGRICULTURAL APPLICATIONS

DIRECT GAS-FIRED AIR HEATER The air heater agriTERM was developed for livestock buildings. It is entirely made of stainless steel for the maximum corrosion resistance in aggressive environments. The direct flame guarantees maximum efficiency: agriTERM produces low emissions of Nox and Co in the atmosphere resulting in a limited environmental impact. This product can run both on LPG or natural gas. 4 secure suspension eyes included Remotable reset button Thermostat socket Practical gas/electric connections Safety thermostat with manual reset

Thermic power Technical features Power supply Power consumption Noise level at 1 m LPG Methane LPG Methane Nox min-max CO min-max Voltage Frequency* Current *60Hz version available upon request. **Different depending on the country of installation. Notes: The country of destination is to be specified for each order. The standard air heater is preset for methane consumption. In case of LPG consumption it is necessary to use the LPG kit (supplied in the same box). Dimensions and loading possibilities Model agriTERM 25 agriTERM 40 agriTERM 65 agriTERM 90 Loading possibilities on pallet Loading possibilities...

Technical features The air heater agriTERM was developed for livestock buildings. It is entirely made of stainless steel for the maximum corrosion resistance in aggressive environments. The direct flame guarantees maximum efficiency: agriTERM produces low emissions of Nox and Co in the atmosphere resulting in a limited environmental impact. This product can run only on LPG. Available only for extra EU markets. Model agriTERM 125 Thermic power Air displacement Consumption at 1013 mbar/ 15°C Gas pressure Emissions in the atmosphere Power supply Power consumption Noise level at 1 m Nox min-max CO...

The air heater easyTERM was developed for big structures. The double-wall housing in galvanised steel treated with zinc-magnesium guarantees high corrosion resistance and better protection of the surfaces located in very aggressive environments. Therefore it can be installed either inside or outside the building. Its installation is quick and its maintainance is easy: the inside of the machine can be conveniently inspected by opening a small door. The machine can be activated manually, by a thermostat or by an integrated control system. Tested and proven control and safety systems The centrifugal...

Technical features and dimensions Technical features Loading possibilities on pallet TEHMDTECNICP PEPICDLI

A wide variety of applications All data in this catalogue are indicative and are subject to change without prior notice.

TEHMDTECNICn PEPICDLI Release - July 2023 TERMOTECNICA PERICOLI S.r.l. Regione Rapalline, 44 - 17031 Albenga, Italia tel. 0182 589006 fax 0182 589005 [email protected] PERICOLI ASIA PACIFIC Sdn. Bhd. [email protected] PERICOLI CENTRO AMERICA [email protected] PERICOLI MIDDLE EAST [email protected] PERICOLI INDIA Pvt. Ltd. [email protected] pericoli.com 00 pUnlcon 00 PSRIcool are registered trademarks by Termotecnica Pericoli S.r.l.