*myagriexpo

Thermobile bioenergy

Product catalog summary

Overview: Thermobile's Bio Energy heaters are designed to operate using bio-oil, biodiesels, and various vegetable oils. They are not compatible with solvents, thinners, petrochemical-based oils, transformer oil, or any oil above S.A.E. 90. These heaters are suitable for workshops without explosive vapors.

Models and Features:

Bio Energy B: Produces radiant heat only.
Bio Energy B Thermo: Combines radiant heat with hot air from a top-mounted blower.
Bio Energy 1: Offers radiant heat and hot air via a blower.
Bio Energy 2 & 3: Feature a high-capacity axial fan for air distribution, with a heat exchanger for efficiency.

Installation Requirements:

Heaters must be installed on a level concrete floor.
Considerations include electricity supply (240V), flue pipe installation, combustion air supply, and access to the fuel tank.
For most models, it's recommended to draw combustion air from outside to avoid workshop contaminants.

Flue Kit Components: The flue kit includes a T-piece with a draught stabilizer, flue piping, a rain cap, wall brackets, and a high-temperature silicon rubber roof flashing and fitting kit. Proper installation is crucial for efficient operation.

Technical Specifications:

Heated airflow ranges from 1000 to 3000 m³/hr depending on the model.
Fuel consumption and capacity vary by model, with tank capacities ranging from 50 to 55 liters.
Flue connections and dimensions are specified for each model.

Additional Information: Bio oil heaters should not be used with waste oil unless registered with local authorities. The document provides a comprehensive parts list and technical details for installation and operation.

Catalog excerpts

BIO ENERGY Bio-oil fired heaters with flue connection

Open the catalog to page 1

BIO ENERGY OIL - WORKING PRINCIPLES Thermobile Bio Energy oil fired heaters can be operated using Bio Oil, Bio diesels and various vegetable oils. The following must not be used: solvents, thinners, petro-chemical based oils, transformer oil or any oil above S.A.E. 90. Full combustion is achieved in a vaporising system and non-burnable residue is retained in the burner pan. BIO ENERGY B The Bio Energy B and the Bio Energy B Thermo are recommended for workshops where no expolsive vapours are present. Model Bio Energy B produces radiant heat only, whilst the Bio Energy B Thermo produces a combination...

Open the catalog to page 2

INSTALLATION OF THE HEATER The Heater must be installed on acompletely level concrete floor. The positioning of the heater in the workshop must take into account the following factors: ■ Electricity Supply 240V ■ Flue pipe installation ■ Combustion air supply ■ Access to built in fuel tank Except for the Bio Energy B and Bio Energy B Thermo it is recommended that the unit is installed so that the combustion fan draws in clean air from the outside the building ensuring that no vapours, dust or oxygen can be sucked in from the workshop floor. FLUE PIPE INFORMATION The complete flue kit consists...

Open the catalog to page 3

COMBUSTION AIR INTAKE SETS Flue booster | 98.087.345 Optional, suitable for Bio energy b & 1 models only TECHNICAL INFORMATION Bio energy b Tank Capacity Flue connection Heated Airflow (1) Output depending on type of oil. (2) Depending on building insulation - figures quoted are for well - insulated modern building with doors closed * Depth includes T Pieces for the flue stack THERMOBILE Konijnenberg 80 4825 BD Breda The Netherlands

Open the catalog to page 4

Thermobile bioenergy

Thermobile bioenergy

Catalog excerpts

All Thermobile Industries B.V. catalogs and technical brochures