T7

T7

T7

Product catalog summary
Specifications
The T7 Unloading and Tipping Tank has a weight of 7,500 Kg, a length of 7.1 m, and a height of 4.0 m. It features wheels sized 23.1-R26 (14ply) and a track width of 2.35 - 2.80 m. The required horsepower is a minimum of 100 hp, with a capacity of 0.5 - 0.75 ha/h and working speeds of 4 - 8 km/h. The tank size is 12 m3 for unloading and 10 m3 for tipping, with a dumping height of 1.5 - 3.7 m for unloading and 2.65 - 2.85 m for tipping.
Standard Equipment
Includes automatic side and depth steering, blockage warning on elevators, 800 mm cleaning webs, JT Scalpers, Oppelwheels, electrical hydraulic controls, automatic height adjustment on cleaning elevator, speed control on unloading elevator, wide angle PTO-axle, position, side, and rear lights, working lights, and a rotating beacon.
Optional Equipment
Options include hydraulic stone release on oppelwheels, hydraulic pressure kit, stabilizer disc, hydraulic track adjustment, additional cleaning section, "Over brush" on cleaning section, pigtail guard, hydraulic driven disc scalpers, electrical depth control, joystick control, LS hydraulic, and central-lubrication.
Design and Functionality
The T7 is designed for versatility and high capacity with low ground pressure. It can be equipped with extra wide wheels and features effective cleaning with large turbines for optimal separation of dirt and stones. Easy operation is facilitated by optional joystick control for key functions.
Topper Options
The Turbotopper is a lightweight and economical alternative to the Flailtopper, though it does not crush the top as the Flailtopper does.
Scalpers
Standard JT scalpers offer precise scalping with minimal wear and low maintenance. Hydraulic driven disc scalpers are available as an option.
Automatic Controls
The T7 features automatic side and depth control with sensors for accurate machine control, and automatic height control of the tank-elevator to minimize beet fall and maximize tank filling.
See more

Catalog excerpts

T7-1

Track width Working speeds Tank size Dumping height Height under tank, tipped Topper Transmission Standard Equipment Automatic side and depth steering Blockage warning on elevators (+roulettes on full-hydraulic) 800 mm cleaning webs throughout JT Scalpers Oppelwheels Electrical Hydraulic Controls Automatic height adjustment on cleaning elevator Speed control on unloading elevator Wide angle PTO-axle Position-, side- and rear lights Working lights Rotating beacon Optional Equipment Hydraulic stone release on oppelwheels Hydraulic pressure kit for oppelwheels Stabilizer disc, 700 or 900 mm Hydraulic track adjustment, left side wheel Cleaning section, 2 rubber- and 1 reversible steel roller “Over brush” on cleaning section Pigtail guard on 1. turbine Hydraulic driven disc scalpers Electrical depth control from tractor Joystick Control on key functions LS hydraulic Central-lubrication Thyregod A/S - Borgergade 46 - DK-7323 Give - Tlf. 7573 4099 [email protected] - www.thyregod.co

 Open the catalog to page 1
T7-2

Turbo or Flail topper ? Thyregod has for many years developed beet harvesters to be able to work under many different conditions in many countries. This has helped to make the T7 into the unique and versatile harvester, that it is today. The Turbotopper to the left is with its low weight and simple construction, a good and economical alternative to the Flailtopper. The Turbotopper does however not crush the top as the Flailtopper do. Effective cleaning Large turbines which rotates in a "3" motion for optimum separation of dirt and stones, even at high speeds. The T7 can also be equipped with...

 Open the catalog to page 2

All THYREGOD A/S catalogs and technical brochures

  1. 155/85

    2  Pages

  2. TRV

    11  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.