TW-190TDHB
54Pages

INSTRUCTION MANUAL timberwolf-uk.com

© Copyright Entec Industries Ltd 2015 The content of this publication may not be copied, reproduced, republished, posted, broadcast, transmitted or used in any way in any medium without the written permission of Entec Industries Ltd.

SERVICE INSTRUCTIONS Service Schedule Safe Maintenance Safe Lifting of the Chipper Spares Battery Removal and Maintenance Check Fittings Copper Safety Information Battery Safety Information Change Blades Tension Drive Belts INTRODUCTION PURPOSE OF MACHINE MACHINE DIMENSIONS & SPECIFICATIONS PARTS LOCATION DIAGRAMS SAFE WORKING Operator’s Personal Protective Equipment Required Basic Woodchipping Safety General Safety Matters - Do’s and Dont’s Noise Test OPERATING INSTRUCTIONS Safe Transportation Hitching onto the Tow Ball Unhitching the Chipper Stabilising the Chipper Delivery Operator’s...

Thank you for choosing Timberwolf. Timberwolf chippers are designed to give safe and dependable service if operated according to the instructions. IMPORTANT HEALTH AND SAFETY INFORMATION Before using your new chipper, please take time to read this manual. Failure to do so could result in: - PERSONAL INjURY - EqUIPMENT DAMAGE - DAMAGE TO PROPERTY - 3RD PARTY INjURIES This manual covers the operation and maintenance of the Timberwolf TW 190TDHB. All information in this manual is based on the latest product information available at the time of purchase. All the information you need to operate...

Designed to chip solid wood material up to 190mm in diameter and capable of chipping up to 6.5 tonnes of brushwood per hour. 2180 mm, (1300 mm with discharge removed) DIMENSIONS - WITH FIXED TOWHEAD The serial number can be found on the identification plate located on the chassis beam. 3990 mm with standard tow head (3385 mm with feed tray folded) TIMBERWOLF TW 190TDHB (FIXED TOWHEAD) SPECIFICATION Engine type Kubota 4-cylinder turbo diesel Maximum power 33kW (45hp) Cooling method Water cooled Overall weight 1020kg Starting method Electric Roller feed Twin series hydraulic motors Maximum...

Serial No. Location The serial number can be found on the identification plate located on the chassis beam. 4900mm with adjustable tow head (4280mm with feed tray folded) TIMBERWOLF TW 190TDHBA (ADJUSTABLE TOWHEAD) SPECIFICATION Engine type Kubota 4-cylinder turbo diesel Maximum power 33kW (45hp) Cooling method Water cooled Starting method Electric Roller feed Twin series hydraulic motors Maximum diameter material 190mm (?%") Fuel capacity 50 litres Hydraulic oil capacity 15 litres Material processing capacity up to 6.5 tonnes/hr Fuel type Diesel ADJUSTING THE TOWHEAD...

PARTS LOCATOR FEED FUNNEL ROLLER CONTROLS DISCHARGE TUBE DISCHARGE BUCKET DISCHARGE ADjUSTMENT CONTROL AIR INTAKE REFLECTOR FUEL TANK ENGINE GUARDS HYDRAULIC OIL TANK RAIN FLAP REFLECTORS HYDRAULIC OIL FILTER ROTOR HOUSING

PARTS LOCATOR RESERVE TANK RADIATOR jOCKEY WHEEL ASSEMBLY HYDRAULIC PUMP FUEL PUMP FUEL FILTER IN-LINE FUEL FILTER ROTOR PULLEY DRIVE PULLEY ENGINE CONTROL PANEL DIRECTIONAL STARTER CONTROL MOTOR ALTERNATOR VALVE

SAFE WORKING The chipper will feed material through on its own. To do this, it relies on sharp blades both on the feed rollers and the chipper rotor. To keep the blades sharp, only feed the machine with clean brushwood. DO NOT put muddy/dirty wood, roots, potted plants, bricks, stones or metal into the chipper. OPERATOR'S PERSONAL PROTECTIVE EQUIPMENT REQUIRED Chainsaw safety helmet fitted with mesh visor and recommended ear defenders to the appropriate specifications. Close fitting heavy-duty non-snag clothing. Work gloves with elasticated wrist. Face mask if appropriate. Steel toe cap...

SAFE WORKING GENERAL SAFETY MATTERS ALWAYS stop the chipper engine before making any adjustments, refuelling or cleaning. DO NOT operate chipper unless available light is sufficient to see clearly. ALWAYS check rotor has stopped rotating and remove chipper ignition key before maintenance of any kind, or whenever the machine is to be left unattended. DO NOT use or attempt to start the chipper without the feed funnel, guards and discharge unit securely in place. ALWAYS operate the chipper with the engine set to maximum speed when chipping. ALWAYS check the machine is well supported and cannot...

SAFE WORKING NOISE TEST MACHINE: TW 190TDHB NOTES: Tested chipping 120mm x 120mm corsican pine 1.5m in length Noise levels above 80dB (A) will be experienced at the working position. Wear ear protection at all times to prevent possible damage to hearing. All persons within a 4 metre radius must also wear good quality ear protection. 89 .4d B Guaranteed Sound Power: 119dB (A) As required by Annex III of Directive 2000/14/EC “Noise Emission in the environment by equipment for use outdoors”

OPERATING INSTRUCTIONS SAFE TRANSPORTATION • WHEN towing a chipper the maximum speed limit • ON rough or bumpy road surfaces reduce speed accordingly to protect your machine from unnecessary vibration. • WHEN towing off road be aware of objects that may catch the chipper undergear. • WHEN towing off road ensure inclination is not • AvOID excessively pot holed ground. DO NOT RIDE ON THE CHIPPER WHEN IT IS BEING TOWED. • WHEN reversing the chipper the short wheel base will react quickly to steering. • ALWAYS check the discharge is tight before moving. • KEEP tyre pressures inflated to 2.9 bar...

OPERATING INSTRUCTIONS All Timberwolf TW 190TDHB machines have a full pre - delivery inspection before leaving the factory and are ready to use. Read and understand this instruction manual before attempting to operate the chipper. In particular, read pages 6-8 which contain important health and safety information and advice. OPERATOR’S PERSONAL PROTECTIVE EQUIPMENT REQUIRED CHAINSAW safety helmet fitted with visor and recommended ear defenders to an appropriate specification. HEAvY-DUTY gloves with elasticated wrist area. CLOSE - FITTING heavy-duty non-snag clothing. SAFETY footwear. FACE...