JP6
7Pages

Product Segments • Industrial Motion TiMOTION's JP6 series in-line linear actuator shares the same design concept as the JP5 and JP7. Specifically designed for use in industrial applications with moderate loads, it’s capable of withstanding loads up to 3,000N. It is also suitable for product applications that require a compact installation space. Also, with an optional IP69K rating, it is designed to withstand high temperature, high pressure water jets, as well as the ingress of dust and other solid contaminants. General Features Max. load Retracted length Output signals Operational temperature range -10/-30°C~+70°C (with/without overcurrent protection PCBA) Operational temperature range at full performance Storage temperature range

Retracted Length Load and Speed CODE SelfDuty Locking Cycle Force (N) No With No With No With No With Load Load Load Load Load Load Load Load 24V DC 24V DC 24V DC 24V DC 12V DC 12V DC 12V DC 12V DC Note 1 Please refer to the approved drawing for the final authentic value. 2 T he current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. Speed will be similar for all the voltages. 3 The current & speed in table are...

Motor Speed (5600RPM) Speed vs. Load 15.0 Performance Data (24V DC Motor)

Motor Speed (5600RPM) Speed vs. Load 15.0 Performance Data (12V DC Motor)

Rear Attachment (mm) See page 7 2 = Aluminum, slotless, hole 10.2 4 = Aluminum, U clevis, slot 4.2, depth 12.1, hole 10.2 Front Attachment (mm) See page 7 2 = Aluminum, slotless, hole 10.2 4 = Aluminum, U clevis, slot 6.2, depth 13.0, hole 10.2 Overcurrent Protection PCBA Output Signal Load Type 0 = Sample packaging C = Standard package, US fumigated pallet (1219*1016) 1 = Standard package, EU fumigated pallet (1200*800) E = Standard package, US plywood pallet (1219*1016) 5 = Standard package, EU plywood pallet (1200*800) Special Function of Spindle Subassembly

JP6 Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke+Y A. Front Attach. Load & Speed Type (N) B, C, D Rear Attach.

JP6 Ordering Key Appendix Rear Attachment (mm) 4 = Aluminum, U clevis, slot 4.2, depth 12.1, hole 10.2 2 = Aluminum, slotless, hole 10.2 Front Attachment (mm) 4 = Aluminum, U clevis, slot 6.2, depth 13.0, hole 10.2 2 = Aluminum, slotless, hole 10.2 Connector 01 = Tinnded leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notic