MA3
9Pages

Product Segments • Industrial Motion TiMOTION's MA3 is engineered for heavy-duty applications and harsh environments. With a maximum push/pull force of 16,000N, the MA3 provides a robust and reliable alternative to hydraulic cylinders. Additionally, the MA3 has an optional T-Smart version. Embedded with a driver board, the MA3 allows for easy integration with a variety of control interfaces, eliminating the need for an external control box. The MA3 is available in two T-Smart alternatives: 1) T-Smart Advanced The actuator is controlled by an embedded PCBA, providing advanced functionality and real-time feedback. The T-Smart Advanced configuration allows for synchronization of up to 8 actuators, as well as providing accurate position feedback through a variety of options (Hall, HallPot., PWM). *TiMOTION’s software program, PGMA, exclusively supports the T-smart Advanced configuration, providing the user autonomy to adjust many parameters such as speed, stroke limits, soft-stop, soft-start, and much more. 2) T-Smart Bus Communication The actuator is controlled by the customer's control system, such as their ECU or PLC. - SAE J1939: This protocol provides seamless integration with CAN bus SAE J1939 interfaces, the standardized communication protocol commonly implemented in offroad vehicles and other industrial applications. - Modbus: This is a serial communication protocol predominantly used in industrial automation and process control. The T-Smart Modbus protocol can be smoothly incorporated into existing industrial systems through its interface. General Features Max. load Max. speed at max. load Max. speed at no load Retracted length IP rating Certificate Stroke Output signals Voltage Operational temperature range Operational temperature range at full performance Manual drive 16,000N (push/pull) 8.9mm/s 172.5mm/s ≥ Stroke + 200mm IP69K UL73, EMC 25~1000mm Mechanical Pot., external signal of actuator, NPN Hall sensors, PNP Hall sensors 12/24V DC; 12/24V DC (thermal switch) -40°C~+85°C +5°C~+

Retracted Length Load and Speed Spindle CODE Type Self Locking Duty Cycle Force (N) Mechenical Brake With Load With Load Motor Speed (5100RPM) ACME screw Ball screw Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. With a 48V DC motor, the current is approximately half the current measured in 24V DC. Speed will be similar for...

Motor Speed (5100RPM) Speed vs. Load 200.0 180.0 160.0 Performance Data (24V DC Motor)

Load & Speed Rear Attachment (mm) See page 6 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.8 3 = # 45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 4 = # 45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 5 = Stainless Steel, slotless, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 9 = #45 Steel, slotless, hole 16.2 Front Attachment (mm) See page 6-7 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.8 3 = # 45 Steel, U...

MA3 Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B+C+D = Y 2. Retracted length needs to ≥ Stroke+Y Important notice: Depending on the attachments, the motor cover might interfere with the customer's device, when retracted length is between 225~318mm. Please confirm before placing order. A. Front Attach. Load & speed type (N) F, K, G, H, M, N, J, P, Q, R

MA3 Ordering Key Appendix Rear Attachment (mm) 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.8 3 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 4 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 5 = Stainless Steel, slotless, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 Front Attachment (mm) 4 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 3 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 2 = #45 Steel,...

MA3 Ordering Key Appendix Front Attachment (mm) 8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 5 = Stainless Steel, slotless, hole 10.2 9 = #45 Steel, slotless, hole 16.2 Direction of Rear Attachment (Counterclockwise) 2 = 45° Connector (mm) 01 = T inned lead

MA3 Ordering Key Appendix Wire Definition DC, Normal Port Function of Wire Color Limit Switches Position Feedback 0. Without 1. ● RD Two Micro Switches Cut off ● BK The Actuator at ● RD EOS ● WH 3. D. 6. Two Micro Switches Send Signal at EOS

MA3 Ordering Key Appendix Wire Definition #T_T-Smart Direct Cable Out, 1+1 Type: Military Connector (A1) + Molex 6P Connector (P2) (T-Smart Dedicated Option) Port Wire Color Power ground Ctrl - Extend Ctrl - Retract Hall-Pot./ Hall A/ Commu. A Signal ground For programming or wireless accessories. * Control motor movement: when Vcc wire is short circuit with Ctrl-Entend / Ctrl-retract wire. Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to chan