MA4
8Pages

Product Segments • Industrial Motion TiMOTION's MA4 series is a compact electric linear actuator, suited for almost any working condition. With a high IP rating and extraordinary toughness, the MA4 is a solid and versatile solution for agricultural, industrial, and commercial applications. General Features Max. load Retracted length ≥ 215mm (depending on chosen options) Output signals Mechanical Pot., NPN Hall sensors Operational temperature range Operational temperature range at full performance Manual dri

Load and Speed CODE Self Locking Force (N) Motor Speed (6000RPM, Duty Cycle 25%) A Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. With a 48V DC motor, the current is approximately half the current measured in 24V DC. Speed will be similar for all the voltages. 3 The current & speed in table are tested when the actuator is...

Motor Speed (6000RPM, Duty Cycle 25%) Speed vs. Load 60.0 Performance Data (24V DC Motor)

Load & Speed Rear Attachment (mm) See page 6 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 6.4 5 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 10.0 Front Attachment (mm) See page 6 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 6.4 5 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth...

MA4 Ordering Key Appendix Retracted Length (mm) 1. If stroke ≤ 108mm, minimum retracted length refer 2. If Stroke ≥ 109mm, Calculate A+B+C=Y 3. Minimum retracted length is Stroke+Y Front Attach. Load & Speed Type (N) A, B, C, D, E

MA4 Ordering Key Appendix Rear Attachment (mm) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 6.4 ø6.4 5 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 8.0 6=A luminum, U clevis, slot 6.1, depth 10.5, hole 10.0 Front Attachment (mm) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 6.4 ø6.4 5 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth...

MA4 Ordering Key Appendix Direction of Rear Attachment (Counterclockwise) 1 = 0° Connector (mm) 01 = Tinned leads, core wire 50, stripped wire 10

MA4 Ordering Key Appendix Wire Definition Normal Port Number Function of Wire Color Limit Switches Position Feedback 0. Without Two Micro ● RD Switches Cut Off The Actuator at ● BK EOS ● RD Two Micro Switches Send Signal at EOS Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subje