MA5
11Pages

Product Segments • Industrial Motion TiMOTION's MA5 electric linear actuator is specifically designed for applications that face harsh working environments and require ruggedness and durability. Its IP69K protection can withstand high-pressure water jets, and the ingress of dust and other solid contaminants. The MA5 can also be customized with various feedback options depending on the application requirements; moreover, it can be equipped with a grease nipple to increase the protection degree and life cycle. Suitable applications for MA5 include agricultural equipment, such as valves, spreaders, harvesters, and grain handlers. General Features Max. load Retracted length ≥ 200mm (depending on chosen options) Output signals Mechanical pot., NPN Hall sensor Grease chamber Operational temperature range Operational temperature range

Retracted Length With Grease Chamber Standard Dimensions (mm) Retracted Length

Load and Speed CODE Self Locking Force (N) Motor Speed (5200RPM, duty cycle 25%) A Motor Speed (6600RPM, duty cycle 25%) F Motor Speed (3800RPM, duty cycle 25%) S Motor Speed (2200RPM, duty cycle 25%) T Note 1 Please refer to the approved drawing for the final authentic value. 2 This self locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC;...

Motor Speed (5200RPM) Speed vs. Load 60.0 Performance Data (24V DC Motor)

Motor Speed (6600RPM) Speed vs. Load 60.0 Performance Data (24V DC Motor)

Motor Speed (3800RPM) Speed vs. Load 6.0 Performance Data (24V DC Motor)

Motor Speed (2200RPM) Speed vs. Load 6.0 Performance Data (24V DC Motor)

Rear Attachment (mm) See page 10 4 = Aluminum, U clevis, slot 6.0, width 10.5, hole 6.4, one piece casting with gearbox 5 = Aluminum, U clevis, slot 6.0, width 10.5, hole 8.0, one piece casting with gearbox 6 = Aluminum, U clevis, slot 6.0, width 10.5, hole 10.1, one piece casting with gearbox Front Attachment (mm) See page 10 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 6 = Aluminum, slotless, hole 10.0 3 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 10.0 4 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 6.4 5 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 8.0...

MA5 Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B+C = Y 2. Retracted length needs to ≥ Stroke + Y 3. The total Retacted length calculated must be equal or longer than below minimum value (1) When choosing the wiper set #0: And the front attachment is #1, #2, min retracted length ≥ 200mm, And the front attachment is #3, #4, #5, min retracted length ≥ 212mm (2) When choosing the wiper set #1, #2, #3: And the front attachment is #1, #2min retracted length ≥ 238mm, And the front attachment is #3, #4, #5min retracted length ≥ 250mm B. Load V.S. Stroke Stroke (mm) D. Wiper Set &...

MA5 Ordering Key Appendix Rear Attachment (mm) 6 = Aluminum, U clevis, slot 6.0, width 10.5, hole 10.1, one piece casting with gearbox 5 = Aluminum, U clevis, slot 6.0, width 10.5, hole 8.0, one piece casting with gearbox 4 = Aluminum, U clevis, slot 6.0, width 10.5, hole 6.4, one piece casting with gearbox 6 = Aluminum, slotless, hole 10 ø10 5 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 8.0 4 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 6.4 3 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 10.0 2 = Aluminum, slotless, hole 8.0

MA5 Ordering Key Appendix Direction of Rear Attachment (Counterclockwise) 1 = 90° Functions for Limit Switches Wire Definitions CODE extend (VDC+) retract (VDC+) extend (VDC+) retract (VDC+) extend (VDC+) upper limit switch retract (VDC+) lower limit switch extend (VDC+) upper limit switch medium limit switch retract (VDC+) lower limit switch Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.