Product Segments • Industrial Motion TiMOTION’s TA2PAC is a linear actuator with an integrated AC/DC power supply. It is controlled by 1 neutral wire and 2 line wires (extension and retraction), making it ideal for automating ventilation systems in livestock farming. General Features Max. load Retracted length > 235mm (depending on chosen options) Output signals Operational temperature range Operational temperature range

Standard Dimensions (mm) Retracted Length Load and Speed CODE Self Typical Current (A) Typical Speed (mm/s) Typical Current (A) Typical Speed (mm/s) Locking No Load With Load No Load With Load No Load With Load No Load With Load Force (N) 110V DC 220V DC Motor Speed (5200RPM, Duty Cycle 25%) A Note 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested when the actuator...

Motor Speed (5200RPM) Speed vs. Load 60.0 Performance Data (110V DC Motor)

Motor Speed (5200RPM) Speed vs. Load 60.0 Performance Data (220V DC Motor)

Rear Attachment (mm) See page 7 1 = Aluminum casting, hole 6.4, one piece casting with gear box 2 = Aluminum casting, hole 8.0, one piece casting with gear box 3 = Aluminum casting, hole 10.0, one piece casting with gear box 4 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gear box 5 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gear box 6 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gear box Front Attachment (mm) See page 7 1 = Aluminum casting, hole 6.4 2 = Aluminum casting,...

TA2PAC Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B+C = Y 3. For TA2PAC, the retracted length of actuator needs to ≥ the 2. The retracted length of actuator needs to ≥ Stroke+Y A. Rear Attach. Front Attach. Signal Output Load & Speed Type(N) Front Attach. min RL value in table, in case the tube set too short.

TA2PAC Ordering Key Appendix Rear Attachment (mm) 2 = Aluminum casting, hole 8.0, one piece casting with gear box 3 = Aluminum casting, hole 10.0, one piece casting with gear box 5 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gear box 15 6 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gear box 15 4 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gear box 1 = Aluminum casting, hole 6.4, one piece casting with gear box Front Attachment (mm) 3 = Aluminum CNC, U clevis, slot 6.0, depth...

TA2PAC Ordering Key Appendix Direction of Rear Attachment (Counterclockwise) 1 = 90° Wire Definition Without T-Smart Port Number Wire Color Position Feedback 0. Without Live (EXT+) Live (EXT+) Live (RET+) Live (RET+) Connector 1 = Tinned leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without pri