Product Segments • Comfort Motion TiMOTION’s TA5P is designed using a one-piece aluminum outer cover for increased strength and enhanced protection from contaminants. The TA5P utilizes a linear slide to move the load, instead of a standard extension tube. Industry certifications for the TA5P include EMC, and RoHS. It is also available with Hall sensors for position feedback and a special L-shaped mounting bracket. General Features Max. load Retracted length Hall sensors, L-shaped bracket Specially designed for recliner One-piece design, stronger structure, cable-free

Retracted length

Load and Speed CODE Self Locking Force (N) Pull Typical Current at Rated Load (A) Motor Speed (2600RPM, Duty Cycle 10%) A Motor Speed (3400RPM, Duty Cycle 10%) L Note 1 Option C / D / E / F / G / J / L / M / N / O / Q / T use iron bearing, others use plastic. 2 Please refer to the approved drawing for the final authentic value. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 Operational temperature range at full performance: +5°C~+45°C 5 The current & speed in table are...

Motor Speed (2600RPM, Duty Cycle 10%) Speed vs. Load 60.0 Performance Data (24V DC Motor)

Motor Speed (3400RPM, Duty Cycle 10%) Speed vs. Load 60.0 Performance Data (24V DC Motor)

Note: please contact TiMOTION before making an order L-Shaped Bracket on The Front Functions for Limit Switches See page 7 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal Output Signal 0 = Without (for direct cut system, no cable) 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4...

TA5P Ordering Key Appendix Functions for Limit Switches Wire Definitions CODE extend (VDC+) retract (VDC+) extend (VDC+) retract (VDC+) extend (VDC+) upper limit switch retract (VDC+) lower limit switch extend (VDC+) upper limit switch medium limit switch retract (VDC+) lower limit switch Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.