OROFLEX™Drag
2Pages

tipsa Kuriyama Group OROFLEX" Drag Premium Quality Extruded TPU Lay Flat Hose Formerly OROFLEX 30 SL i»»<... . , r Applications: Designed and recommended as a liquid manure drag hose, irrigation feeding line, traveling irrigator supply line, sludge injection, transport of compatible fluids (see chemical resistance chart), brackish and sea water and waste water transport. Construction: Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant thermoplastic polyurethane extruded through the weave, forming a single homogenous construction without the use of glues or adhesives. Its construction does not permit corrosion or scaling, while giving a high resistance against abrasion and cutting. Easy handling, storage & transport, which allows for fast installation and retrieval. 2% maximum hose elongation and 10% maximum hose expansion. Lining Properties: a. Ultimate Tensile Strength of the lining: Minimum guaranteed value of 40 MPa (5.800 psi). b. Ultimate Elongation: 500% minimum. Lengths: Standard lengths in 100m (330ft) and 200m (660ft). Longer lengths may be available upon request. Abrasion Resistance: The OROFLEX DRAG hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main concern. Under practical conditions, thermoplastic polyurethane is considered to be the most abrasion resistant elastomeric material. Service Temperature Range: -50°C (-58°F) to 65°C (150°F), with peaks of up to 80°C (175°F). Special versions for higher and lower temperatures available upon request. Ozone Resistance: No visible signs of cracking will appear due to the ozone. Excellent weather and UV resistance. Chemical Resistance: Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications. Couplings: As requested by purchaser; Camlock, Bauer, Perrot, Victaulic, Storz, etc.

Premium Quality Extruded TPU Lay Flat Hose Formerly OROFLEX 30 SL Physical Properties: Part Number Nominal Inner Diameter Wall Thickness Working Pressure Burst Pressure Tensile Strength Nominal Weight The actual diameter of these hoses may differ slightly from the nominal diameter specified in this chart to make sure that they can be properly assembled with the couplings. For diameter tolerance questions please contact your distributor or directly to TIPSA. right to modify any specification without prior notice to meet or changing standards. Customers are advised that special diameters or...