DOMINATOR PRO 2
12Pages

FINGER WHEEL RAKES V SERIES

6 good reasons to buy a Tonutti rake Low maintenance costs • simple construction • no drive shaft • no mechanical transmission Clean windrows • reduced soil contamination • adjustable pressure on the ground • ach finger wheel works independently and adapts e perfectly to the contours of the ground. Low fuel consumption • eduction in fuel consumption per hectare thanks to the r use of low power tractors • educing fuel consumption increases the productive r capacity • considerable reduction in air pollution. High working capacity • igher working speed compared to rakes that are PTO h driven •...

The details that make the difference Variable working width The working width can be adjusted from the driver’s cab. This unique feature allows to adjust the volume of the windrow in accordance to the pick-up machinery performance Pressure of the finger wheels on the ground Quick and easy adjustment thanks to a simple crank for perfect windrow no matter what the conditions are. Excellent adaptation to the ground Perfect raking on any terrain is guaranteed thanks to the Independent finger wheels as well as the support of 4, 7 or 9 tyres, depending on the model. “Panthograph” rake opening...

Simple and easy to use All expectations are met with the Raptor rakes: • large working width from 3.50 m up to 5.85 (Raptor V10) 6.70 (Raptor V12) and 7.60 (Raptor V14 ) • low power requirement (less than 80 HP) • accurate windrows • perfect raking at a high speed. New Generation Pro The new generation Pro series has been designed for maximum resistance and durability. Many details provide greater structural capacity starting from the drawbar up to the rear axle. The ground clearance has been increased to allow optimum product flow. New AS version The new AS version (SELF-STEERING) differs...

www.tonuttigroup.com Center Wheel Kit K2H New hydraulic device (optional) A unique system in the rake field with central windrow. The kit makes it possible to move the hay under the windrow that would otherwise not be touched. The device is hydraulically operated together with and the side wheels lift. The kit can be disengaged whenever not required. Steering bar with 90° angle Standard version (A): the original machine with straight drawbar can be fitted with a steering bar so as to allow manoeuvres with a tight turning radius. No modifications are needed to the hydraulic system. AS...

The Professional solution Dominator V12 and V14 Pro with central windrow combine working comfort and top performance with working widths from 4 m up to 7.50 and 8.50 m. Fielding is quick and easy; adjustment 1 of the working width is hydraulically operated and is performed from the driver’s cab. There are many farmers and contractors who have chosen the Dominator Pro for its ease of use, low maintenance and high performance for all types of forage including heavy forage (silage) with the result of obtaining a homogeneous and clean windrow without loss of leaves and integral as far as its...

Telescopic system Tonutti has introduced the telescopic system technology with Dominator PRO series. The pantograph system that connects side frames to the central drawbar makes possible to shorten up drawbar to 1,70 m when being opened. The system improves machine’s manoeuvrability. Self-steering system The new self-steering system allows the steering incidence to be varied and thereby guarantee excellent manoeuvrability under any working or transport condition. Spare tyre kit (optional) All Tonutti V-rakes have an optional spare tyre kit so that the tyre can be changed quickly. Only a...

Top of the range Thanks to the construction principle, the Millennium series has definitely solved the problem of “large widths.” The Millennium Pro Series rakes combine comfort and high performance level, thanks to a working width of 9.60 m (V16) up to 11.70 m (V20) in a single run. Efficiency and raking quality combined with high working speeds (over 20 km / h) will increase your productivity. The new challenge: more work and less expense This is the ideal machine for any operator who always want to get the best production output, but paying attention to optimize on machinery and working...

Large wheel diameter (a perfect follow of the ground contours) • 6 or 8 wheels for the Millennium Pro V16 model; • 9 wheels for the V18 and V20 models. Flexible and independent frame (V18-V20): The side frames in the V18 and V20 versions are centrally articulated to guarantee perfect adaptation of the finger wheels to irregular or sloping terrain. “Pantograph” The frame of the Millennium Pro, like Dominator Pro, has a telescopic system. The system connects the side frames to the central drawbar allowing to considerably shorten the drawbar when being opened improving the machine’s...

HEAVY CROP finger wheel A new profile of the finger wheel, designed to optimize the raking capacity of heavy forage such as silage or corn stalks; double universal flange to increase the sturdiness and to allow mounting on both sides of the rake (optional). Transport Despite the considerable working width, the rake width in transport position is only 3 m, granting a safe and easy transfer from one plot to another as well as on roads. Spare tyre kit (optional) All Tonutti V-rakes have an optional spare tyre kit so that the tyre can be changed quickly. Only a small investment to save time.

Professional machinery with central windrow and self-steering device • models in the Millennium Pro 3 series covering a working width Multi-functional in-line machinery with side windrow • models in the T-3GW series 2 covering a working width of 4.10 m Low cost machines with central windrow • models in the V 10 Pro series with 2 2 and 4 rubber tyres, respectively, from 9.60 m to 11.70 m • models in the Dominator Pro 2 series covering a working width of 7.50 and 8.50. and 6.05 m • models in the T-4GW series 2 covering a working width of 7.50 m and 8.50 m. covering a working width of 5.85 m •...