AUTOMATIC POLYELECTROLYTE PLANTS

Process Description The installation of the Automatic Polyelectrolyte Plant is indispensable for chemicals dosing in wastewater treatment. They are used for flocculation of solid particles in all types of wastewater, industrial and urban wastewater. These plants allow the preparation (mixing with water), maturation and dosing of the polyelectrolyte in an automatic and simple way. ADVANTAGES OF AUTOMATIC POLYELECTROLYTE PLANT • The supply pressure supplied can be regulated as required by means of a control solenoid valve and pressure reducer with pressure gauge in the water circuit. • It is corrosion...

Electrical panel AUTOMATIC POLYELECTROLYTE PREPARATION PLANT Input Poly. Input Water Input Water+Poly. Emptying and transferring Emptying Ø63 Exit Mature poly 3/4” pressure sensor Phase One: Start mixing Poly. Intermediate Phase: The Poly. mixture has good characteristics • It consist on three chambers: one for mixing, another for maturation and a third that collects the mature polyelectrolyte at the optimum point for use. • Retention time for each chamber is 30 minutes. Final Phase: Poly. Macerated Solid Polyelectrolyte Clean Water Mixture of Poly. and water • It includes an anti-condensation...

Models | Stainless PAP TECHNICAL SPECIFICATIONS PAP- INOX SERIES MODELO Storage Total capacity (l) Capacity per chamber m3 Production capacity (l/h) Length (mm) (L) Width (mm) (W) Height (mm) (H) Material Overflow Emptying Pump discharge Pressure sensor outlet Drainage 1st tank Dispenser Material Polyelectrolyte hopper Capacity (l) Dosage (l/min) Material Auger Power (kW) Geared motor Power (kW) Shaft and propeller material

AUTOMATIC POLYELECTROLYTE PREPARATION PLANT Maximum level (to be configured) Working level (to be configured) Minimum level (to be configured) Drainage first reservoir 20 • It consists of two chambers, one chamber for the mixing of the product and another chamber that is reached by overflow for maturation.. First Phase: Start mixing the poly with the water (emulsion) • Continuous operation. Final Phase: The polymer mixture has good characteristics • Made of stainless steel. Solid polyelectrolytes Clean water Mixture of Poly. and wat

AUTOMATIC POLYELECTROLYTE PLANT PAP TECHNICAL SPECIFICATIONS MODEL 22 0,3 0,122 Acero Inox. Acero Inox. 45 0,3 0,122 Acero Inox. Acero Inox. 45 0,3 0,122 Acero Inox. Acero Inox. Hopper Capacity (l) Dosing rate (l/min) Power (kW) Material Auger 60 0,37 0,18 Acero Inox. Acero Inox. 22 22 0,3 0,3 0,122 0,122 Acero Inox. Acero Inox. Acero Inox. Acero Inox. Mixer Preparation, maturation and dosing of polymer powder • Toro Equipment’s PAP is an equipment formed by a main tank made of GRP where the preparation and maturation of the polymer powder is carried out, with an upper nozzle for manoeuvre and...

PAP Polyelectrolyte | Models PAPE TECHNICAL SPECIFICATIONS PAPE AUTOMATIC POLYELECTROLYTE EMULSION PLANT MODEL PAPE 500 PAPE 1000 PAPE 1500 Flow meter Measuring range (l/h) Mixer Power (kW) Shaft and propeller material Preparation, maturation and dosing of emulsified polymer • The automatic emulsified polyelectrolyte plant for sludge conditioning prior to dewatering consists of a main tank made of GRP, an agitator and a disperser to achieve the optimum concentration of liquid polymer. • It is part of the sludge skid

WORLD REFERENCES ∙Algeria ∙Argentina ∙Australia ∙Austria ∙Belgium ∙Brazil ∙Bulgaria ∙Canada ∙Chile ∙China ∙Colombia ∙Costa Rica ∙Croatia ∙Dominican Republic ∙Ecuador ∙Egypt ∙Estonia ∙Finland ∙France ∙Germany ∙Greece ∙Guatemala ∙Holland ∙Hungary ∙Indonesia ∙Iran ∙Ireland ∙Israel ∙Italy ∙Japan ∙Jordan ∙Latvia ∙Lebanon ∙Lithuania ∙Luxembourg ∙Malaysia ∙Mexico ∙Montenegro ∙Morocco ∙Netherlands ∙Nicaragua ∙Pakistan ∙Panama ∙Peru ∙Philippines ∙Poland ∙Portugal ∙Qatar ∙Romania ∙Russia ∙Saudi Arabia ∙Serbia ∙Seychelles ∙Singapore ∙Slovenia ∙South Africa ∙Spain ∙Switzerland ∙Thailand ∙Trinidad and Tobago...