TRI-LOC™ FITTINGS – FOR 16, 17 & 18MM OD HOSE AND DRIPLINE 1 INSTALLATION TIPS* 1 Fitting – 3 Tubing Sizes – SAVE TIME! Barbed Insert Combines with Compression Collar for Superior Retention Strength Push tubing onto barb until tubing is fully inserted. Ergonomic Collars Reduce Worker Fatigue Twist-Off Collar Makes Fittings Reusable Turn collar clock-wise until it bottoms out on the base of the fitting. Turn collar counter-clock wise until collar is hand-tight and tubing is securely in place. Tri-Loc ½” Slip Tee (for solvent welding ½” PVC) Tri-Loc Coupling Tri-Loc Elbow Tri-Loc ¾” FHT Adapter (with washer) Tri-Loc ½” FPT Tee (for solvent welding ½” PVC) Tri-Loc MHT Cap (Remove cap to access ¾” MHT to connect to hose) Tri-Loc Reducing Tee connects 16, 17 and 18mm OD dripline and drip hose to Toro T-EHD2057 hose with .805 ID. TL-RT805 fitting also works with hose ID of .790 - .845” (20 – 21.5mm) *Twist collars counter-clock wise at the same time to assure tight, secure connection. The Toro Company • Irrigation Division • 5825 Jasmine St. • Riverside, CA • 92504 • 877-345-8676 P/N 17-1184-IRC • Specifications subject to change without notice. For more information, contact your local Toro distribut