Tires and Wheels for Light Service Tire iBrochure

Tires for Light service The tires for light service are designed for farming, industry, turf, snow and high speed service and are suitable for rims up to 16 inches in diameter. In this product segment, Trelleborg has one of the largest ranges in the world. Together with the wide range of wheels, Trelleborg can supply complete wheel solutions to customers, in high quality and perfect design. Green area tire for professional use. Green area tire for hobby machines. High Speed tire with high shoulder profile. Farming tire with traction pattern. Industry tire with combined pattern. Combined pattern...

Farming tire with easy rolling pattern. Farming tire with extra strong tread and easy rolling pattern. Farming tire with traction pattern. Combined tire for farming and green area. High speed tire with easy rolling pattern. Farming tire with easy rolling pattern. Farming tire with extra good sidewall stability. Smooth pattern tire for green area. Industry, farming and green area tire with smooth pattern. High Speed or industry tire with high shoulder. Tire especially made for snow machines. Industry tire with good grip and low roll resistance. High Speed tire with combined pattern. Farming tire...

cnnicai .. specificationsTIRES 4” SIZE

* Replaces item: 315/7515-TL 126A5 T539 SOFT GRIP TL = Tubeless. LI = Load index. RC = Rolling circumference = Calculated values.

Specially designed for grass and sensitive ground conditions. Its soft carcass design, considerate tread pattern and low ground pressure all contribute to no track formation and very little soil compaction. This tire is also flexible for both soft and hard surfaces. TIRES 17.5” Load data in the table is valid for only one tire only. Tires for gentle service on green areas. Reference speed, load and inflation pressure are shown in bold. 25 = 25 km/h concerns service on green areas on road. TL = Tubeless. Tubes are not suitable for use in Garden Tractor tires. 40 = 40 km/h concerns service...

Speed IndexThe Speed Index (SI) is an international code indicating the maximum speed for which a tire is designed.

The Trelleborg range of wheels and rims, is available from 3” to 16” in size and can be supplied in many different configurations depending on application, requirements for load capacity and several other values influencing the design. The wheels and rims are designed with different specifications - ie. sizes, integral hubs, bearings, bores, offsets, plate thickness, paint finish etc. that match the performance requirements defined. Rims and Wheels available The table contains the product range available in term of dimensions, widths and configurations. The columns welded/divided indicate whether...

Rim/Wheel width

Technical information about rims and wheels Size The first figure specified for a rim or wheel indicates its width in inches. The last figure indicates its diameter in inches. The letter after the first figure indicates the contour of the rim or wheel. The symbol after the letter indicates whether it has been assembled or welded. 5.00Ax8 8 indicates the rim/ wheel diameter in inches 5.00 indicates the rim/ wheel width in inches x indicates that rim/ wheel is welded R indicates rim/ wheel contour - indicates that rim/ wheel is divided

The difference between a rim and a wheel Rim A rim consists of two drop-centred disc or two flat-based disc with a bore, welded or assembled. The rim is fitted onto a hub and therefore it is vital that the diameter of the pitch circle of the stud holes is the same on the rim as on the hub. The standard stud holes are pressed with a conical stud seat of 60°, 80° and 90° both for welded and assembled rims. A wide range of bores are available so that rims can be supplied with a bore to meet your specific demands. Wheel A wheel consists of two drop-centred disc welded together or two flat-based disc...

The paint finish Trelleborg uses a fully automated phosphating and powder painting facility which gives the products a perfect finish and allows the choice of more than fifty different RAL colours. Furthermore, there is the possibility to choose your own colour outside this range when ordering a large number of units. Integrated hub types The integrated hubs are designed to match the axle specifications and the required load capacities. The hubs can be designed with a number of different bearings, lubrication nipples, stub axles, seals, caps, axles and other features or have a more plain design....

Trelleborg also produces a wide range of hubs and Furthermore the hubs can be designed with a number stub axles (up to a length of 600 mm). of different bearings, lubrication nipples, seals, caps, The hubs are designed with a flange of different size axles and other features. and bores matching the rim specifications. Examples of hubs available Type of hub: hub GC Hub for fork mounting. Possible to get different sizes. Bearing: ball bearings or tapered roller bearings Type of hub: cast hub EC Possible to get different sizes with suitable axles. Bearing: ball bearings or tapered roller...

Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. Our innovative engineered solutions accelerate performance for customers in a sustainable way. The Trelleborg Group has local presence in over 40 countries around the world. facebook.com/TrelleborgAgri twitter.com/TrelleborgWheel youtube.com/TrelleborgAgri flickr.com/TrelleborgAgri linkedin.com/company/trelleborgwheelsystems instagram.com/TrelleborgAgri Trelleborg Wheel Systems Italia S.p.A. Via Nazionale Tiburtina, 143 - 00010 Villa Adriana (RM) Italy Phone:...