Trelleborg Tires and Wheels for Light Service
16Pages

Tyres and Wheels for Light Service Tire iBrochure

The tyres for light service are designed for farming, industry, turf, snow and high speed service and are suitable for rims up to 16 inches in diameter. In this product segment, Trelleborg has one of the largest ranges in the world. Together with the wide range of wheels, Trelleborg can supply complete wheel solutions to customers, in high quality and perfect design. DRIVER GARDENER Green area tyre for professional use. Green area tyre for hobby machines. High Speed tyre with high shoulder profile. Farming tyre with traction pattern. Industry tyre with combined pattern. Combined pattern for...

Farming tyre with easy rolling pattern. Farming tyre with extra strong tread and easy rolling pattern. Farming tyre with traction pattern. Combined tyre for farming and green area. High speed tyre with easy rolling pattern. Farming tyre with easy rolling pattern. Farming tyre with extra good sidewall stability. Smooth pattern tyre for green area. Industry, farming and green area tyre with smooth pattern. High Speed or industry tyre with high shoulder. Tyre especially made for snow machines. Industry tyre with good grip and low roll resistance. High Speed tyre with combined pattern. Farming...

Technical specifications TYRES 3” SIZE TREAD PATTERN Industrial Industrial TYRES 4” OD PERMITTED mm RIMS +/-1,5% TREAD PATTERN Green Area Industrial TREAD PATTERN Green Area TREAD PATTERN High Speed Green Area Green Area Green Area Green Area/Farming T539 Grip TL Green Area/Farming Green Area Green Area Industrial Industrial

PERMITTED RIMS

TL = Tubeless. LI = Load index. RC = Rolling circumference = Calculated values.

T404 - T409 Specially designed for grass and sensitive ground conditions. Its soft carcass design, considerate tread pattern and low ground pressure all contribute to no track formation and very little soil compaction. This tyre is also flexible for both soft and hard surfaces. Load data in the table is valid for only one tyre only. Tyres for gentle service on green areas. Reference speed, load and inflation pressure are shown in bold. 25 = 25 km/h concerns service on green areas on road. TL = Tubeless. Tubes are not suitable for use in Garden Tractor tyres. 40 = 40 km/h concerns...

Speed IndexThe Speed Index (SI) is an international code indicating the maximum speed for which a tyre is designed.

The Trelleborg range of wheels and rims, is available from 3” to 16” in size and can be supplied in many different configurations depending on application, requirements for load capacity and several other values influencing the design. The wheels and rims are designed with different specifications - ie. sizes, integral hubs, bearings, bores, offsets, plate thickness, paint finish etc. that match the performance requirements defined. The table contains the product range available in term of dimensions, widths and configurations. The columns welded/divided indicate whether the specific size...

Rim/Wheel width Dimension

Technical information about rims and wheels Size The first figure specified for a rim or wheel indicates its width in inches. The last figure indicates its diameter in inches. The letter after the first figure indicates the contour of the rim or wheel. The symbol after the letter indicates whether it has been assembled or welded. 5.00Ax8 8 indicates the rim/ wheel diameter in inches 5.00 indicates the rim/ wheel width in inches x indicates that rim/ wheel is welded R indicates rim/ wheel contour - indicates that rim/ wheel is divided

The difference between a rim and a wheel Rim A rim consists of two drop-centred disc or two flat-based disc with a bore, welded or assembled. The rim is fitted onto a hub and therefore it is vital that the diameter of the pitch circle of the stud holes is the same on the rim as on the hub. The standard stud holes are pressed with a conical stud seat of 60°, 80° and 90° both for welded and assembled rims. A wide range of bores are available so that rims can be supplied with a bore to meet your specific demands. Wheel A wheel consists of two drop-centred disc welded together or two flat-based...

Trelleborg uses a fully automated phosphating and fifty different RAL colours. Furthermore, there is the powder painting facility which gives the products a possibility to choose your own colour outside this perfect finish and allows the choice of more than range when ordering a large number of units. The integrated hubs are designed to match the axle specifications and the required load capacities. The hubs can be designed with a number of different bearings, lubrication nipples, stub axles, seals, caps, axles and other features or have a more plain design. Examples of integrated...

Hub types and axles Trelleborg also produces a wide range of hubs and stub axles (up to a length of 600 mm). The hubs are designed with a flange of different size and bores matching the rim specifications. Furthermore the hubs can be designed with a number of different bearings, lubrication nipples, seals, caps, axles and other features. Examples of hubs available Hub for fork mounting. Possible to get different sizes. Possible to get different sizes with suitable axles. Bearing: ball bearings or tapered roller bearings Bearing: ball bearings or tapered roller bearings The axles produced...

Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. Our innovative engineered solutions accelerate performance for customers in a sustainable way. The Trelleborg Group has local presence in over 40 countries around the world. facebook.com/TrelleborgAgri twitter.com/TrelleborgAgri youtube.com/TrelleborgAgri flickr.com/TrelleborgAgri linkedin.com instagram.com/TrelleborgAgri Trelleborg Wheel Systems Italia S.p.A. Via Nazionale Tiburtina, 143 - 00010 Villa Adriana (RM) Italy Phone: +39 0774 384701 - Fax: +39...