SOLOMIX 2
52Pages

SOLOMIX 2 with feed mixers

LARGEST RANGE OF FEED MIXERS IN THE WORLD

SPECIALIST IN FEEDING TECHNOLOGY Your cows should be given a balanced ration every day to remain healthy and to be able to perform at their best. It is thus important to focus on a good mix quality and good feed management. This takes time. Accurate feeding is, in fact, an important but time-consuming task in the farming business. Trioliet can help you with this. As a specialist in feeding technology, Trioliet has the most extensive range of feed mixers, feeding robots, self-propelled feed mixers and stationary mixers. Our trailed feed mixers come in various shapes and sizes. The smallest...

The Solomix 2 New Edition with two vertical augers is the most popular feed mixer in our range. It is available in various configurations and varies in size from 10 to 36 m3. Thanks to a number of smart adaptations in the design, the feed is mixed faster and better than in comparable mixer wagons. The unique auger knives reduce the feed in size so that a perfectly homogeneous mix is created. In addition, discharging is smooth and even thanks to the large discharge doors, the wide discharge units and the unique double auger wings on the augers. In short, this is a great performing compact...

FEED WITH PERFECT PRECISION

GOOD MIXING PREVENTS RUMINAL ACIDOSIS Are you looking for a feed mixer with sufficient capacity to provide your cattle with a balanced ration every day? Then it is important that the machine does what it is supposed to do; mix well. A homogeneously mixed ration means the cows cannot be selective and so receive all the necessary nutritional values as calculated by the feed consultant. Research shows that selection behaviour by cattle is one of the main causes of ruminal acidosis and related health problems. Mixing well can prevent these problems. MIXES VERTICALLY AND HORIZONTALLY Our feed...

GOOD MIXING PREVENTS RUMINAL ACIDOSIS

Here you can see a new auger knife and a worn knife. SHARP AUGER KNIVES ARE IMPORTANT FOR A GOOD MIXING RESULT Above you can see a new auger knife and a worn auger knife. Our Trioform auger knives have a unique shape that helps knife can no longer process the feed properly. For an optimal them stay sharp longer. In addition, they are assembled mix, we advise you to check the auger knives once a month. horizontally on the auger so that they deliver optimum It is also important to place the blades in the right positions cutting performance with as little resistance as possible. on the auger....

AVOID FEED SELECTION WITH THE CORRECT LOADING ORDER Also, make sure that the mixing tub is not too full. Ideally, The order in which the various components are loaded into Overloading the mixer wagon has a negative effect on the feed mixer is usually determined by farmyard logistics. the mixing time and mixing quality. you should fill it no more than ten centimetres below the rim. If the concentrate silos are located next to the barn where the feed mixer is parked, most cattle farmers will start loading The situation can, of course, vary per ration. Do you want to the feed and then the...

THE X-RANGE SERIES: ROBUST POWERHOUSES FOR INTENSIVE USE The X-Range series are equipped with: The Solomix 2 series of 24-36 m is available in a special √ Heavy-duty 1000 RPM drive line; Heavy-Duty configuration, the X-Range series. The X-Range √ Standard 22 mm Long Life “Quick Mix” augers; series combines a robust construction with the best mixing √ Mixing tub with 10 mm wall thickness and 15 mm quality and the lowest Total Cost of Ownership (TCO). The X-Range is extremely well suited for intensive use under wear strip; √ Heavy-duty chassis. The heavy-duty pendulum tandem harsh conditions....

ESPECIALLY FOR CATTLE FARMERS WITH COARSE RATIONS The Solomix VLL feed mixer series easily processes long, fibrous feed, such as round and square bales, thanks to the conical design of the mixing tub. The tub is deep and narrow at the bottom so that the feed is pushed in a certain direction. With the help of the Trioform auger knives, long feed components, such as grass or hay, are cut into small pieces without any problems. But the Solomix VLL series has still more advantages. The feed mixer is low and extremely manoeuvrable and The Solomix 2 is available with a building height of 2.40...

TRIOMASTER S LEAVES A SUPER SMOOTH CUTTING SURFACE

TRIOMASTER S The Triomaster S is an ideal loading and silage cutter implement for cattle farmers who like to administer their raw feed storage. The Triomaster S has a fixed knife that effortlessly punches through all types of silage without the feed becoming detached. The silage pit remains intact and is not pinched or pulled loose, as is often the case with other silage grabbers. The cutting knife of the Triomaster S ensures that the cutting surface remains nicely smooth and dense so that the risk of heating is kept to a minimum. The Triomaster S is available in volumes of 2 and 3 m3....

SHIFTTRONIC FOR CORRECT AUGER SPEED AT THE RIGHT TIME Large feed mixers require relatively high amounts of power and thus, fuel. The Solomix 2 X-Range series (24-36 m3) therefore comes with a planetary gearbox as standard to address the power surges occurring during start-up and loading in particular. In addition to the standard planetary gearbox, Shifttronic 2 and 3-stage automatic PowerShift gearboxes are are available as an option available. The Shifttronic automatically shifts up and down in a few stages to the optimal auger speed for mixing and discharging. light feed components or...

THIS IS HOW THE SHIFTTRONIC WORKS Changes automatically back to the first gear at, for example, 4,500 kg Changes automatically over from the first to the second gear Changes automatically up to the second gear at, for example, 2,500 kg “THE SHIFTTRONIC SAVES ME AN HOUR OF TIME EACH DAY AND 25% IN FUEL.” Hans Luijerink | rosé calf farmer

CUSTOMER CASE STUDY 25% LESS DIESEL CONSUMPTION WITH SHIFTTRONIC (AUTOMATIC) PLANETARY GEARBOX These days, dairy farmer Cees Middelweerd only needs 10 litres of diesel an hour to run his 24 m3 feed mixer. He mixes up two loads a day to feed his herd of 350 milk cows, plus another two loads every third day for his 220 heifers. That means the mixer wagon must process 130 tonnes or so of feed each week, making for approximately 1,000 operating hours annually. Since installing a Shifttronic automatic planetary gearbox, his fuel costs have dropped by an impressive 25%. Based on the previously...