CAN.I/O.100
6Pages

Electronic Control Unit (ECU) Programmable module High protection class IP67 Free contact WDO Relay Programmable IOs (7 inputs and 8 outputs) Optional CANbus termination resistor Functional safety level: SIL2 (EN62061) / PLd (EN13849) Separate power supply (Power and logic) Compact design High configuration flexibility Upgradeable via can bus bootloader CANopen Safety Firmware Upgradable The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Electronic Control Unit (ECU) Programmable module PRODUCT DESCRIPTION The CAN.I/O.100 is an electronic control unit operating as an input/output expansion with CAN Bus communication interface. Optionally, the unit can be used as a master device capable of autonomously performing actions on the outputs, known the inputs status and by mean user-defined algorithms. These logics can be easily implemented by mean of a simple open source IDE, coding the software in C language. The company reserves the right to make any kind of design or functional modification at any moment without prior notice....

Electronic Control Unit (ECU) Programmable module PRODUCT CODE PROGRAMMING: “C” language, STM32CubeIDE, “gcc” compiler for ARM. On request: IDE & low level driver Safety library. (1) Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. (2) MTTFd > 100 years (EN ISO 13849-1) a) b) a) Standard component. It does not constitute a safety component as defined in the Machinery Directive 2006/42/CE. b) Every second failure of an electronic component is regarded as a dangerous failure. The company reserves the right to make any kind of design or...

Electronic Control Unit (ECU) Programmable module Aptiv (formerly Delphi) 24 WAY PIN HEADER Protection class Operating temperature range Enviromental resistance Weight approx. Shock resistance Vibration resistance ELECTRICAL CHARACTERISTICS Power supply range Reverse polarity protection Over/Under voltage protection EMC directive 2014/30/EU RoHS directive 2011/65/EU + 2015/863/EU (Industrial electromagnetic environment) HARDWARE CHARACTERISTICS Working frequency: 72 MHz Internal flash memory: 256 kB Internal RAM: 48 kB Communication: 1 x CANBUS Working frequency: 48 MHz Internal flash...

Electronic Control Unit (ECU) Programmable module BLOCK DIAGRAMS The controller architecture is based on CAT. 2 of EN 13849-01 THERMAL SPECIFICATION Output current derating (SOA) 14 The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Electronic Control Unit (ECU) Programmable module SAFETY MODE On-Off/PWM open loop High Side Output (max 2A) On-Off/PWM open loop High Side Output (max 2A) On-Off/PWM open loop High Side Output (max 2A) On-Off/PWM open loop High Side Output (max 2A) On-Off/PWM open loop High Side Output (max 2A) On-Off/PWM open loop High Side Output (max 2A) On-Off/PWM open loop High Side Output (max 2A) Power Supply for OUTPUTS stage (max 12A **) GND supply from vehicle battery to CAN-IO logic On-Off/PWM open loop High Side Output (max 2A) Analogue IN range: 0-5,5 V or 0-25 mA or 0-30 V OR On/Off IN High...