DED-13M SAWMILL SLABBER PRODUCT GUIDE $14,000 USD The DED-13M Sawmill is MANUAL 11hp (net), 13hp (gross) electric start Honda GXV390 motor, a complete unit including the frame. 1-800-598-6344 (USA Dealer ) 1-833-961-1904 (Parts / Technical Support / Warranty)

The Turbosawmill Slabber comes standard with our heavy-duty frame system, offering single end operation through an accurate lift gearbox and dial. An additional winch at the far end allows you to also adjust for taper, this is so you can align the beam to that perfect log face. The slabber now includes our standard horizontal winding mechanism with dial so that you can wind the complete frame and beam out of the way when loading logs or removing slabs. The bar is angled at 15% so that when entering and exiting the slab, the chain does not tend to flick off. This angle also increases your bar...

Disassembly (6 assemblies including jockey wheels): 1. Unbolt the long alloy tube. Unbolt the operator end frame. a. You may use the included jockey wheels to prop up the beam during disassembly. You may also remove the long base skids of each frame to reduce the weight. Roll the carriage off the beam onto a pellet in your truck. View of parts and weights 4. To reduce the overall weight of your carriage you may also remove: a. Guards. b. Blade. b. Motor (only four bolts on the 13hp). 5. Unbolt the far end frame. 6. Place the complete beam on your truck’s roof rack or disassemble into pieces for...

Mobility (Farm Dolly kit): You may also purchase the farm dolly kit as an accessory which means you can simply lower the complete sawmill onto this kit, then install the tow hitch bracket at the end of the beam and within minutes transport your sawmill around your property using your vehicle. Includes: • An electric start 13hp Honda vertical shaft engine. • Easy belt and chain tension system. • Easy bar alignment adjustment. • 2 x RX27 chain loops. • 2-year warranty on the mill framework. • Accurate worm gearbox with dial for lift and sideways motion. • Hand crank winch. • Increased output speed...

Accessories for DED-13M Slabber Sawmill Fits all Turbosawmill models. Runs on single phase power (small generator for remote use). Very accurate system. Includes new function allowing quick and easy sectional deep horizontal/vertical cuts. A great time saver! Available in both Metric and Imperial. *Email for freight quote. Manual Center Leg & 6ft Extension 6 feet long beam, leg, tongue inserts, tube, clamps and chain extensions. *Email for freight quote. Transport kit to fit all models. Includes dolly and hold-down clamps to connect to your sawmill for easy farm transport. *Email for freight...

Milling Made Easy www.turbosawmillusa.com 1-800-598-6344 (USA Dealer) 1-833-961-1904 (Parts / Technical Support / Warranty)