PRODUCT DATA SHEET D8 BluePoint increases safety and minimises the risk of accidents around machinery. It allows safety to be visual instead of relying solely on sirens and alarms. The D8 Bluepoint projects a light beam as a concentrated, visible square on the floor in front or behind the machine. This warning light is also available as a standard work light, allowing you to match your machine lighting for a unified design. SUGGESTED APPLICATIONS The D8 BluePoint is mainly used for material handling. However, it can be used across numerous other applications worldwide. MATERIAL HANDLING Note: the lens of the BluePoint is clear, the blue light is emitted from LEDs TECHNICAL DATA TEST STANDARDS Housing Material: Cast Aluminium Overheating Protection Salt Spray ASTM B117 500 h Mounting Options: Hanging Standing Over-voltage Protection Vibration 5-2000 Hz 3 Axis, 10 Grms Polarity Protection Temperature range: -40 to +75 °C Connector: Light Patterns: TYRI’s testing standards can be found at: www.tyrilights.com Consult website for additional lens & mounting options Lens Material:

PRODUCT DATA SHEET BLUEPOINT LIGHT INTENSITY VOLTAGE AMP DRAW POWER WAVELENGTH TYPICAL Candela Machine Operating Range 12 V 24 V Watts nm EN55025 / CISPR25 IEC/SS-EN 62471 | RISK GROUP 2 CAUTION: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. It is important to remember, LED work lights are no more hazardous than other lighting technologies with the same correlated colour temperature (CCT). TYRI complies with the IEC/SS-EN 62471 standard with the addition of the warning label on the product.