video corpo

ARES L
34Pages

{{requestButtons}}

Catalog excerpts

ARES L - 3

OPERATING AND MAINTENANCE MANUAL ARES L CE Declaration of Conformity CE Declaration of Conformity UNIA Sp. z o.o. st. Szosa Torunska 32/38 86 – 300 Grudziadz, Poland Herewith declare with full responsibility that our product: disc cultivator ARES L type / model : ……………………………………. manufacturing year : …………………………….. serial no. : ……………………………………….. is in compliance with the Ordinance of the Minister of Economy of October 21, 2008 (Journal of Laws No. 199, item 1228) and the EU Directive 2006/42/EC of May 17, 2006 and the Ordinance of the Minister of Infrastructure of May 4, 2009 ( Journal of...

Open the catalog to page 3
ARES L - 5

OPERATING AND MAINTENANCE MANUAL ARES L ARES L OPERATING AND MAINTENANCE MANUAL Machine identification data: Type Production year Serial no. This maintenance and operating manual is an integral part of the machine. It is important that the manual is always in the possession of the machine user. Access to the manual should be provided to machine operators and cooperating persons while operation, regulation, repairs and renovations. Before starting the machine please read the operating manual and follow the recommendations and instructions regarding safety and proper usage of the machine.

Open the catalog to page 5
ARES L - 6

OPERATING AND MAINTENANCE MANUAL ARES L

Open the catalog to page 6
ARES L - 7

OPERATING AND MAINTENANCE MANUAL ARES L PREFACE: When buying the machine, check completeness of its accessories that include the following components: • Operating Manual Warranty Card 1. Precautions 1.1 Before you Begin to Use Your Machine • Always pay special attention to the text and illustrations marked with this symbol! These machines are intended for agricultural use only. Any use outside of this purpose shall be considered as not intended use. Learn how to use your machine correctly and carefully! The machine may be dangerous when driven by not authorized individual or when operated...

Open the catalog to page 7
ARES L - 8

OPERATING AND MAINTENANCE MANUAL ARES L Before you start work, learn thoroughly operation of all devices and actuators and functions of the machine. It is too late for this after you start work! Avoid wearing any loose clothing, which could be caught by rotating components of the machine. Always keep the machine clean in order to avoid fire! Always check the surroundings before you start operation. Make sure that you have sufficient visibility!! Never back or reverse the tractor when the machine is lowered to the working position. When reversing, pay attention to the components that...

Open the catalog to page 8
ARES L - 9

OPERATING AND MAINTENANCE MANUAL ARES L Service the machine when it is lowered onto the ground! If the machine is coupled with the tractor, engine of the tractor must be off and brakes on! Pay special attention when passing and overtaking other vehicles and on curves (the unit is rigidly connected to the tractor)! The machine, as the part of the vehicle that protrudes outside the rear side outline of the tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic. When transporting the machine on highways, always use warning lights, distinguishing plate...

Open the catalog to page 9
ARES L - 10

OPERATING AND MAINTENANCE MANUAL ARES L ACCORDING TO THE ROAD SAFETY REGULATIONS (REGULATION OF THE MINISTER OF INFRASTRUCTURE OF 31/12/2002 - DZ. U. NO. 32 OF 2002, ITEM 262), DRIVE ON HIGHWAYS ONLY AFTER HAVING OBTAINED AUTHORIZATION FROM THE COMPETENT HIGHWAYS ADMINISTRATION BODY WHERE THE JOURNEY BEGINS. For the machines that exceed the allowable transport width 3.0m Safety signs and inscriptions should be protected against damage, dirt and overpainting. Replace any damaged or illegible signs and inscriptions with new ones that are available from the manufacturer or vendor of the...

Open the catalog to page 10
ARES L - 11

OPERATING AND MAINTENANCE MANUAL ARES L Fig. 2. Safety symbols ARES L H 1.6 Nameplate The unit data can be found on the nameplate, which is mounted on its front.

Open the catalog to page 11
ARES L - 12

OPERATING AND MAINTENANCE MANUAL ARES L 2. Technical and Identification Data ARES L – disc cultivator; • 4.0 m; 6.0 m; – hydraulically folded version Standard equipment: • Suspension axle: o ø60-825/ø28mm (version 2.5÷3) o ø60-825/ø36mm (version 3.5÷4) o ø70-825/ø36mm (version 4.5÷6) • 2 rows of CLASSIC toothed discs, protected by rubber shock absorber • ø500 mm pipe roller (version 2.5÷4) • ø600 mm pipe roller (version 4.5 / 6.0) • mechanical adjustment of working depth • rigid frame Accessories at extra charge: Table 1 ARES L Accessories at extra charge hydraulic front board (only w....

Open the catalog to page 12
ARES L - 13

OPERATING AND MAINTENANCE MANUAL ARES L Table2 Disc front row Disc back row Frame Compacting roller Chassis (option) Drawbar (option) Front skid (option) Deflector (option) Seeder hanger (option) Suspension axle (option) Axle with brake (ARES L 4.5H; 6.0H) (option)

Open the catalog to page 13
ARES L - 14

OPERATING AND MAINTENANCE MANUAL ARES L 2.1 ARES L specifications Table 3 Type of unit ARES L 2.5 Working width Number of coulter discs Inter-disc pitch Working speed Number of levelling fingers Max. lifting capacity of hydropak mounted / semi-mounted ARES L – 1400 kg / ARES L DRIVE – 2000 kg Spiral ø470 Roller type

Open the catalog to page 14
ARES L - 15

OPERATING AND MAINTENANCE MANUAL ARES L Overall dimensions without accessories Power demand Effective capacity Transport width Weight with pipe roller and without accessories Note: ARES L drive (3.0 ;3.5; 4.0; 4.5; 6.0) – semi-mounted unit on tyre roller ø670mm

Open the catalog to page 15
ARES L - 16

OPERATING AND MAINTENANCE MANUAL ARES L 3. Operating Manual 3.1 First Start Before the first start of the machine: • read the Operating Manual thoroughly • check technical condition of the machine, and in particular, condition of its working parts, protecting mechanisms and the hydraulic system. When finding any damaged or worn parts, replace them with new ones • check tightening of all screws, bolts and nuts. Tighten any loose nuts especially at the beginning of operation of the machine • the tightening torque of the nut of the replaceable hub is 300 Nm, in order to extend the service life...

Open the catalog to page 16

All Unia catalogs and technical brochures

  1. MAX/MAX T

    30 Pages

  2. POLONEZ

    16 Pages

  3. PLOW

    34 Pages