OPERATING AND MAINTENANCE MANUAL MAX / MAX T CE Declaration of Conformity CE Declaration of Conformity UNIA Sp. z o.o. st. Szosa Torunska 32/38 86 – 300 Grudziadz, Poland Herewith declare with full responsibility that our product: cultivating unit MAX / MAX T type / model : ……………………………………. manufacturing year : …………………………….. serial no. : ……………………………………….. is in compliance with the Ordinance of the Minister of Economy of October 21, 2008 (Journal of Laws No. 199, item 1228) and the EU Directive 2006/42/EC of May 17, 2006 and the Ordinance of the Minister of Infrastructure of May 4, 2009 ( Journal...

OPERATING AND MAINTENANCE MANUAL MAX / MAX T MAX / MAX T MAINTENANCE AND OPERATING MANUAL Machine identification data: Type Production year Serial no. This maintenance and operating manual is an integral part of the machine. It is important that the manual is always in the possession of the machine user. Access to the manual should be provided to machine operators and cooperating persons while operation, regulation, repairs and renovations. Before starting the machine please read the operating manual and follow the recommendations and instructions regarding safety and proper usage of the machine....

OPERATING AND MAINTENANCE MANUAL MAX / MAX T

OPERATING AND MAINTENANCE MANUAL MAX / MAX T PREFACE: When buying the machine, check completeness of its accessories that include the following components: Operating Manual Warranty Card 1. Precautions 1.1 Before you Begin to Use Your Machine Read the instruction manual. Pay always special attention to the text and illustrations marked with this symbol! These machines are intended for agricultural use only. Any use outside of this purpose shall be considered as not intended use. Learn how to use your machine correctly and carefully! The machine may be dangerous when driven by not authorized individual...

OPERATING AND MAINTENANCE MANUAL MAX / MAX T of the machine. It is too late for this after you start work! Avoid wearing any loose clothing, which could be caught by rotating components of the machine. Always keep the machine clean in order to avoid fire! Never back or reverse the tractor when the machine is lowered to the working position. When reversing, pay attention to the components that protrude far away and do not use the independent brakes of the tractor! Check air pressure in the wheels of the tractor and cultivator regularly. Check and attach the traffic equipment, such as lighting,...

OPERATING AND MAINTENANCE MANUAL MAX / MAX T The machine, as the part of the vehicle that protrudes outside the rear side outline of the tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic. When transporting the machine on highways, always use warning lights, distinguishing plate and side reflectors. Maximum width of the machine, which can be moved on highways is specified in the detailed regulations of the country of use. They should be observed. Read the Operating Manual thoroughly before operating the machine Stop the tractor engine and take away...

OPERATING AND MAINTENANCE MANUAL MAX / MAX T Lubricate the machine on regular basis ACCORDING TO THE ROAD SAFETY REGULATIONS (REGULATION OF THE MINISTER OF INFRASTRUCTURE OF 31/12/2002 - JOURNAL OF LAWS NO. 32 OF 2002, ITEM 262), DRIVE ON HIGHWAYS ONLY AFTER HAVING OBTAINED AUTHORIZATION FROM THE COMPETENT HIGHWAYS ADMINISTRATION BODY WHERE THE JOURNEY BEGINS. For the machines that exceed the allowable transport width of 3.0m Safety signs and inscriptions should be protected against damage, dirt and overpainting. Replace any damaged or illegible signs and inscriptions with new ones that are available...

OPERATING AND MAINTENANCE MANUAL MAX / MAX T 1.6 Nameplate The unit data can be found on the nameplate, which is mounted on its front.

OPERATING AND MAINTENANCE MANUAL MAX / MAX T 2. Technical and Identification Data MAX / MAX T – MAX tine unit and MAX T disc unit are designed for loosening and levelling the soil. Each section is provided with a ground-following system, so it perfectly adapts to the ground, on which it works. The machines are delivered in the following versions: • 3.0m; 4.0m; 4.5m; 6m; 7.5m; and 9m Table 1. STANDARD EQUIPMENT front string roller, ø390 mm two rows of AGRESSIVE ø460 mm discs levelling bar behind the tine/disc section rear double string roller, ø320/280 mm rigid frame (Version 3) hydraulically...

OPERATING AND MAINTENANCE MANUAL MAX / MAX T Frame Rear roller Skid Deflector (option) Tine section Front roller or front skid Support Disc section Chassis with drawbar (option)

OPERATING AND MAINTENANCE MANUAL MAX / MAX T 2.1 MAX Specifications Table 4. Item Working width No. of tines Tine pitch string roller, ø 400 (levelling bar* instead of front string roller) double string roller, ø320mm/ø280mm Crosskill, ø320mm/string roller, ø280mm* double Crosskill, ø320mm alternating roller* spiral roller, ø470m* 7 ÷ 11 see par. 1.4. Transport on Highways 3.15÷4.95 4.2÷6.6 120÷150 160÷180 tractor driver 3000 3000 4500 6000 1300 1300 Working speed Transport speed Effective capacity, W1 Power demand Operator(s) Dimensions L W H Weight /without equipm./ approx. Tractor class

OPERATING AND MAINTENANCE MANUAL MAX / MAX T 2.2 MAX T Specifications Table 5. Item Working width No. of discs, Ø460 Max working depth Disc pitch Roller type Working speed Transport speed Effective capacity, W1 Power demand Operator(s) Dimensions L W H Weight /without equipm./ approx. Tractor class Machine type MAX T MAX T 4.5 6.0 6. 7. mounted/ mounted/ semi-mounted semi-mounted 4.5 6.0 36 48 up to 13