OPERATING AND MAINTENANCE MANUAL PLOW CE Declaration of Conformity CE Declaration of Conformity UNIA Sp. z o.o. st. Szosa Torunska 32/38 86 – 300 Grudziadz, Poland Herewith declare with full responsibility that our product: semi-plough PLOW type / model : ……………………………………. manufacturing year : …………………………….. serial no. : ……………………………………….. is in compliance with the Ordinance of the Minister of Economy of October 21, 2008 (Journal of Laws No. 199, item 1228) and the EU Directive 2006/42/EC of May 17, 2006 and the Ordinance of the Minister of Infrastructure of May 4, 2009 ( Journal of Laws No. 75/2009,...

OPERATING AND MAINTENANCE MANUAL PLOW PLOW MAINTENANCE AND OPERATING MANUAL Machine identification data: Type Production year Serial no. This maintenance and operating manual is an integral part of the machine. It is important that the manual is always in the possession of the machine user. Access to the manual should be provided to machine operators and cooperating persons while operation, regulation, repairs and renovations. Before starting the machine please read the operating manual and follow the recommendations and instructions regarding safety and proper usage of the machine.

OPERATING AND MAINTENANCE MANUAL PLOW

OPERATING AND MAINTENANCE MANUAL PLOW

OPERATING AND MAINTENANCE MANUAL PLOW PREFACE: When buying the machine, check completeness of its accessories that include the following components: Operating Manual Warranty Card 1. Precautions 1.1 Before you Begin to Use Your Machine • Read the instruction manual. Pay always special attention to the text and illustrations marked with this symbol! These machines are intended for agricultural use only. Any use outside of this purpose shall be considered as not intended use. Learn how to use your machine correctly and carefully! The machine may be dangerous when driven by not authorized individual...

OPERATING AND MAINTENANCE MANUAL PLOW of the machine. It is too late for this after you start work! • Avoid wearing any loose clothing, which could be caught by rotating components of the machine. • Always keep the machine clean in order to avoid fire! • Always check the surroundings before you start operation. Make sure that you have sufficient visibility!! • Never back or reverse the tractor when the machine is lowered to the working position. When reversing, pay attention to the components that protrude far away and do not use the independent brakes of the tractor! • Check air pressure in...

OPERATING AND MAINTENANCE MANUAL PLOW The machine, as the part of the vehicle that protrudes outside the rear side outline of the tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic. When transporting the machine on highways, always use warning lights, distinguishing plate and side reflectors. Maximum width of the machine, which can be moved on highways is specified in the detailed regulations of the country of use. They should be observed Read through the Operating Manual thoroughly before operating the machine Stop the tractor engine and take away...

OPERATING AND MAINTENANCE MANUAL PLOW Safety signs and inscriptions should be protected against damage, dirt and overpainting. Replace any damaged or illegible signs and inscriptions with new ones that are available from the manufacturer or vendor of the machines. Fig. 1. Location of the safety symbols - PLOW 1.6 Nameplate The machine data can be found on the nameplate, which is mounted on its front.

OPERATING AND MAINTENANCE MANUAL PLOW Technical and Identification Data PLOW B – bolt-protected tines PLOW S – spring-protected tines ø70-825/ø36mm coupling rigid frame, 100x200mm PLOW tines bolt-protected tines spring-leaves protection of tines (version S) Optional accessories: rubber support wheels roller holders C harrow with holder PTO shaft application system (split axis) mechanical coupler hydraulic coupler (only version B) pipe roller, ø600mm spring roller, L ø600mm spiral roller, ø600mm C-pack roller, ø600mm Packer roller, ø700 steel roller, ø600mm set of warning plates The machines are...

OPERATING AND MAINTENANCE MANUAL PLOW Roller holder mounting Holder Tine Leg Support wheel Fig. 2. 2.1 Diagram of Tine Spacing On the Frame a) PLOW B

OPERATING AND MAINTENANCE MANUAL PLOW

OPERATING AND MAINTENANCE MANUAL PLOW

OPERATING AND MAINTENANCE MANUAL PLOW PLOW Specification Table 1. Item Parameter Type of machine unit Working width Tine pitch Working speed Clearance under frame Power demand Dimensions L without W optional H accessories Transport width (without support wheels) Weight without roller Coupling category

OPERATING AND MAINTENANCE MANUAL PLOW 3. Operating Manual 3.1 First Start Before the first start of the machine: read the Operating Manual thoroughly check technical condition of the unit, and in particular, condition of its working parts, mechanisms protecting tines from overload and the hydraulic system. When finding any damaged or worn parts, replace them with new ones check tightening of all screws, bolts and nuts. Tighten any loose nuts especially at the beginning of operation of the machine check fitting of the quick-connectors of the hydraulic hoses of the machine to the sockets on the...

OPERATING AND MAINTENANCE MANUAL PLOW Mounting and Disconnecting the Machine The tractor should stand on a firm and level ground in order to connect the machine to it in a safe and correct manner. Fig. 11. Connecting the trailed machine shift the tractor hydraulics to the position control back the tractor to a distance that allows connection of the suspension axle (D) with the frame plates and the tractor upper coupler (A) secure the suspension axle (D) in the frame plates by means of pins and cotter pins fold the leg (E) to its transport position clean the plough hydraulic quick connectors and...