EVOGUARD PUMP BROCHURE
8Pages

Pumps for the beverage and food industry and for aseptic processes

The hygienic centrifugal pump for absolute process reliability Type H1CP 180, 210 and 230 Characteristics ■ Standard motor type B14 according ■ Standard motor type B35 according ■ All seals flush mounted; therefore to IEC, energy efficiency IE3 All seals flush mounted; therefore no recess or dead space in the housing Nominal connection widths: DN 50 – DN 100 (DIN 11851, DIN 32676 etc.) Housing connection via clamps, the housing is therefore infinitely rotatable by 360° Pump installation via motor base no recess or dead space in the housing ■ Nominal connection widths: DN 25 – DN 50 (DIN...

The single-acting mechanical shaft seal ■ Modular design with only one size → variance and cost reduction of the spare parts ■ Dismantling of seal via the impeller → fast and easy maintenance ■ Spring not installed in the product chamber → hygiene in accordance with the Shaft seal Product room EHEDG regulation ■ No dynamic seal on the shaft → shaft is no wear part Counter ring The rinsed mechanical shaft seal Sliding ring ■ Utilisation of the same parts of the single-acting seal ■ Shaft seal in the cover is rinsed and cleaned from the back ■ Very easy conversion from single to double-acting...

Self-priming centrifugal pump HSCP The new self-priming centrifugal pump HSCP fills a gap in the evoguard pump range. By combining the established H1CP pump with a suction rotor, a very powerful and efficient pump could be developed, which in addition reflects the high evoguard quality standards. In this fashion, the new pump can not only reach a high suction level, but, even more importantly, an exceptional suction performance regarding the speed of venting pipelines. This makes the HSCP the most powerful pump on the market. Technical data ■ Elastomer sealings according ■ Flow rate up to...

Self-priming centrifugal pump HSCP Parts in contact with product are made of solid material Same mechanical shaft seal as H1CP Patented return flow nozzle for fastest suction Only one size of mechanical shaft seal used Your benefits ■ Fastest venting of pipelines ■ Same parts and spare parts as H1CP ■ Perfect and fast cleaning ■ Low noise level ■ Energy saving due to high efficiency ■ Smooth surfaces, high pressure resistance ■ Easy and fast maintenance ■ Sealing failure easily detectable As the self-priming pump HSCP is based on the well-established H1CP pump, many components are identical...

Multistage Centrifugal Pump HMCP With the HMCP, the evoguard pump range now includes an efficient multi-stage pump. In its design, we remain true to our philosophy of manufacturing all components that come in contact with the product from solid material using turning and milling methods (no cast or sheet metal parts). This allows us to achieve a very good surface quality in our standard product, meaning the pump can also always be used in sensitive areas with strict hygiene requirements, for example in breweries, dairies, for soft drinks, etc. High delivery head hygienic, efficient and...

Multistage Centrifugal Pump HMCP The new generation of a hygienic multistage centrifugal pump Using the latest CFD calculations, a hydraulic design was developed which makes it possible to achieve a high efficiency together with a pump delivery that is gentle on the product. The latest recommendations from the EHEDG for the reduction of dead space, enclosed spaces and fast cleaning were also implemented. Your benefits ■ Sealing at the product flow ■ Same spare parts as to the ■ Perfect and fast cleaning ■ Gentle product handling with ■ Energy saving due to high ■ Smooth surfaces, high...

Technical data Hygienic centrifugal pump single stage (normal priming) Kunde / Kundennummer Production data Capacity Delivery height Maximum operating pressure Temperature Viscosity Low NPSH values In contact with the product Not in contact with the product Mechanical shaft seal Seals Housing (in contact with the product) Impeller Not in contact with the product Connection: Type and nominal diameter Up to 100 m3/h with water Up to 80 m water column PN 16 (on request also PN 25) 95 °C (higher temperatures on request) Up to 400 mPas (cP) production data Förderdaten flow rate Fördermenge...