Catalogs >
Valmetal >
Robotic Feed Pushers

Robotic Feed Pushers
4Pages

Catalog excerpts

FEEDING SYSTEMS FEEDING WHEELGOODS MANURE HANDLING SYSTEMS MANURE WHEELGOODS Minimum alley width for turning Robotic Feed Pushers A clearance of 20’’ (51 cm) on each side of the robot is required to turn at the end of the aisle. Automated systems to maximize feed intake. Specifications Length CANADA Quebec UNITED STATES Wisconsin California Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without prior notice. Illustrations may include optional equipment and accessories, an

Open the catalog to page 1

A helping hand _ • • to maximize production Which type of feed pusher is best suited for my farm? Valmetal offers both a rotary-drum type, and a Both feed pusher models: powered-auger type of feed pusher so you can choose the right one for your needs. • OPerate with rechargeab|e batteries. • Follow paths of magnets or magnetic strips embedded in the floor. • Can be controlled by mobile device, tablet or computer. Elements to consider • Frequency of feeding • Consistency of feed delivery • Floor conditions and slopes Alley widths & lengths Internet availability Increase milk production It is...

Open the catalog to page 2

Rotary feed pusher Features 24 Volt gear motor Twin 12-Volt batteries 24 automatic cleaning cycles Main power disconnect Benefits Heavy unit is able to push heavier feed lines. Simple and reliable system that requires minimal maintenance. Large drum handles wider feed lines. Daily automatic cleaning cycles using the Orbi-Feed app. Easy to install, program and operate. Wheel release handle Heavyweight construction Rubber skirt band On-board controls The rubber skirt and rotating movement of the device pushes feed towards the animals. The Orbi-Feed features two emergency stop buttons located...

Open the catalog to page 3

Auger feed pusher Pro-Feed + is a new generation with a unique auger design that loosens, mixes and pushes feed simultaneously as it travels. The ability to program paths 14’’ (35 cm) to the left or right of the default path allows the Pro-Feed + to adapt to shrinking feed volumes throughout the day. Remote service support 24VDC servo-motor Twin 12-Volt gel batteries Large diameter low-speed auger On-board touchscreen Obstacle safety system Advanced programming A waterproof controller with 10’’ (25 cm) touch screen is located on the top of the device. It can be detached from the lid to...

Open the catalog to page 4