TWINTRAC
2Pages

HANSON CONTROL SYSTEM HANSON WINCH SYSTEM QUALITY HANSON PRODUCTS Hanson control systems feature high quality electrical enclosures that protect the ammeter and other electrical components in the feed room environment. SUPER-TRAC RING DRIVE UNLOADER STANDARD Precision hand winch with 40-to-1 gear ratio makes Hanson unloaders easy to raise and lower. The enclosed oil bath keeps gears clean and lubricated during operation. STANDARD START-STOP SYSTEM The weather and dust proof fiber enclosure does not rust. An optional 2-button remote control allows the operator to start or stop the unloader from a remote position. The same proven combination alloy that is used in manufactu-ring the famous Hanson unloader transmission gears has been incorporated into the gears for their winches providing years of trouble-free service. Winch shown with guard removed for illustration only BUNK FEEDERS AND CONVEYORS RADIAL II CENTER DRIVE UNLOADER This panel combines all the features included in the standard panel PLUS an automatic lowering controller. The 4-button remote control (included) allows the operator to run both, the unloader and the winch from a remote position. Valmetal’s continuing program of product improvement makes specifications, equipment and model availablility subject to change without notice. Some photos picture the Safety shield removed to show detail. Never operate equip ment without shield in place. POSI-TRAC RING DRIVE UNLOADER Some photos in this brochure have safety shields removed to show additional detail on equipment features. Never operate equipment without safety shields in place. Valmetal continually updates and improves products and reserves the right to make changes in the design, specifications, or to add improvements to our products without incurring an obligation on equipment purchased. Valmetal’s continuing program of product improvement makes specifications, equipment and model availability subject to change without notice. HS-65 WINCH DUAL CONTROL PANEL TWIN-TRAC SURFACE DRIVE UNLOADER The heavy duty HS-65 Winch must be used with silos 65’ and taller. It features a wide spool for maximum cable capacity and heavier gears with a 60-to-1 ratio for ease of operation. YOUR LOCAL DEALER: 230, Boulevard industriel Saint-Germain-de-Grantham (Québec) J0C 1K0 Canada Tel : 819 395-4282 Fax : 819 395-2030 A drill attachment or electric attachment are optional features of the Hanson Winches. Electric winch attachment 15497 State Hwy 131 Tomah, WI 54660 United States Tel : (608) 374-2206 Fax: (608) 374-2302 info@valmetal.com - www.hanson-unloaders

is shown in filling mode. The unloader is easily converted from feeding to filling mode. THE TWIN TRAC IS A TIME-PROVEN UNLOADER. SIMPLE YET VERY FUNCTIONAL Full-length Stainless Steel Spout Liner (optional) GREAT FOR HAYLAGE! GALVANIZED STEEL SPOUT YOKE STYLE SUSPENSION - WITH SPRING LOADED PIVOT PINS features 1 3/8’’Adjustable Pillow Block Bearings for allowing easy adjusment for the tip clearance, large cast iron paddles, a 28’’ diameter housing for maximum blowing capacity, 1/4’’ AR plate backwrapper and removable top cover. Each blower paddle is attached by a large 1’’ hardened pin....