Coating - Cascade Liquid Coater

1 / 2 PagesView full catalog

Coating - Cascade Liquid Coater

Product catalog summary

Hygienic Operation

Internal cleaning tools are included to maintain hygiene.
Heating systems keep fats liquid to prevent clogging in pipes.
Each nozzle set has air cleaning to prevent dripping and clogging.

Benefits and Features

Constructed entirely of stainless steel.
Can be installed directly under a pellet mill or as a post-pelleting application.
Features two-sided coating and electrical heating with temperature monitoring.
Fully insulated with a building height of 1600 mm.
Equipped with hinged and removable hatches for cleaning and inspection.
Automatic air cleaning for nozzles and easy detachment.
Switching spray points at correct liquid pressure for variable product flow.
Includes a liquid-pressure sensor with display.

Execution

Suitable for spraying up to 2.5% liquid on cold pellets and 3% on hot pellets.
Maximum liquid viscosity is 50 cP.
Used oil must be suitable for a 250 µm filter.
Positioned between the pellet mill and cooler or before bulk loading as a post-pelleting application.
Heating starts at conditioner start-up to reduce steam flash-off.
Liquid spraying begins with increased pellet mill load.
Standard available in ATEX22.

Process

The Van Aarsen cascade liquid coater is designed to spray fats on animal feed pellets, increasing energy density and improving feed utilization. This process is crucial for efficient animal feed production, offering advantages over fat dosing on die, such as more accurate dosing, better distribution, no contamination in the pellet mill, and a simpler, cleaner process.

Datasheet

Type	Min. Capacity (t/h)	Max. Capacity (t/h)	Min. Flow (l/min)	Max. Flow (l/min)	Nozzles
CLC300	9	24	0.5	11.5	2 x 3
CLC600	18	45	1.0	24.0	2 x 6

No rights can be claimed based on this document. Descriptions and illustrations are subject to change due to continuous product improvement.

Catalog excerpts

Cascade Liquid Coater Process The Van Aarsen cascade liquid coater is designed to spray fats on animal feed pellets. This process increases energy density, facilitating better utilization of feeds. This is why the process plays an increasingly important role in efficient animal feed production. Important advantages liquid coating compared to fat dosing on die: ▶ more accurate dosing and better distribution throughout the feed ▶ no contamination in pellet mill ▶ considerably simpler and cleaner process Benefits and features Description ▶ Construction completely made of stainless steel. ▶ Fits directly under the pellet mill or as a post pelleting application under a dosing screw ▶ Two sided coating ▶ Electrical heating on housing and piping with monitoring of temperature ▶ Completely insulated ▶ Building in height 1600 mm ▶ Hinged hatches ▶ Removable cleaning and inspection hatch ▶ Cleaning tools to clean the coater internally without dropping dirt into the outlet ▶ Automatic nozzle cleaning with air ▶ Easy detachable nozzles ▶ Switching spraypoints at the correct liquid pressure at variable product flow ▶ Liquid-pressure sensor with display provided on the coater Execution ▶ Suitable for spraying up to 2.5% liquid on cold pellets and 3% liquid on hot pellets ▶ Maximum allowable viscosity of liquids is 50 cP ▶ Used oil has to be suitable for a 250 µm filter ▶ The Cascade Liquid Coater is situated between the pellet mill and the cooler or just before bulk loading; this means it is a ‘post pelleting application’ ▶ Tracing starts heating at conditioner start-up (± 30 minutes before pellet flow). This will reduce the steam flash-off. ▶ Liquid spraying starts at increasing pellet mill load ▶ The CLC is standard available in ATEX22 Hygienic operation ▶ Tools for cleaning the coater internally are included ▶ Heating will keep fat liquid, preventing clogging in piping ▶ Each nozzle-set is provided with air cleaning, preventing dripping and clogging of the nozzle CLC600 with opened hatches Datasheet V005 No rights can be claimed, based on the information in this document. Descriptions and illustrations are subject to change, due to con

Open the catalog to page 1

Cross section coater Product flow Coating of product flow

Open the catalog to page 2

All Van Aarsen International B.V. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list