Transport - Piping
6Pages

Piping for gravity conveying Piping is applied in many areas in a feed mill. Main application is gravity conveying of the solid bulk goods from intake (such as grains), up to finished product (such as meal), pellets and crumbs. Van Aarsen supplies standard round and square welded piping and modular round piping with clamping rings. Both systems provide excellent flowing properties. The choice for one of these systems within the process is determined by the specific requirements. Intake section Wear resistance / heavy duty Standard square or round piping Modular round piping Raw material dosing section Wear resistance / heavy duty Standard square or round piping Grinding – mixing line Pelleting line Finished product section Flexibility in lay out and easy adjustments in case of changes Cost efficient assembly (low skill) Modular round piping Short connections Cost efficient, easy to exchange with standard piping Standard square or round piping Straight connections Cost efficient, easy to exchange with standard piping pieces Standard square or round piping Complex connections Flexibility and optimal flowing characteristics Modular round piping Orange: modular round piping Blue: standard square or round piping No rights can be claimed, based on the information in this document. Descriptions and illustrations are subject to change, due to continuous product improvement and therefore not binding.

Benefits and features Standard square or round piping Modular round piping Cost efficiency ▶ Easy manufacturing in standard lengths, custom made on site. ▶ Cost efficient connections to rectangular outlets. ▶ Complete piping will be manufactured according to predetermined specifications, resulting in short assembly times. ▶ Determining of lengths tuned to the specific situation on site during installation. ▶ Easy to adapt with local available piping parts. ▶ Quick-assembly by connections with clampingrings. ▶ Easy adjustments or extensions in case of changes in the process and lay out. ▶...

The slides are designed by Van Aarsen for closing and opening the inlet and outlet of various machines and bins. The slide is a machine intended for building into a larger assembly. Various versions, dimensions and constructions are available: Square slides • open construction airoperated or motor operated • closed construction air operated Slides for the chain conveyor • open construction airoperated or motor operated • closed construction air operated Grid slide, discharge dosing weigher • hydraulic operated or motor operated Dosing slide slidetable • hydraulic operated Открытые задвижки...

Pneumatic operated Motor operated Hydraulic operated Steel 37.2 Coated for indoor use Stainless steel SS304 Coated for outdoor use Steel 37.2 Coated for indoor use Mechanical stop Closed construction (chain conveyor and square slides): Closed part of the slide is cleaned with exit air, in combination with a sweep strip Location sensor To determine position and control actuator Chain conveyor/square slide: Chain conveyor/square slide: Discharge slide: Discharge slide: Slide grid / dosing: After 100% discharge, the slide is opened and closed several times To determine position and control...

Valve boxes The valve boxes are designed by Van Aarsen for gravity conveying of free flowing, non-glutinous, granular bulk goods. They can also be used to divert a product flow. The valve box is a component that is intended for building into a larger assembly. Various versions, dimensions and constructions are available: Valve box angle between the outlets 80° ▶ air operated ▶ motor operated (actuator) Valve box angle between the outlets 40° ▶ air operated ▶ motor operated (actuator) Valve box 3-way angle between the outlets 40°/80° ▶ air operated ▶ motor operated (actuator) Datasheet No...

Size flange (square) Angle between outlets Pneumatic operated Motor operated, actuator