BC1000XL
2Pages

BRUSH CHIPPER OPERATOR SAFETY. Combined with the ECOIDLE™ ENGINE CONTROL SYSTEM. SMARTFEED. The patented SmartFeed system patented bottom feed stop bar is the four-position upper feed control bar with dual stop positions and forward/reverse feed positions. Mounted over the feed table, it enables the operator to stop the feed rollers and select forward or reverse operations. Dual reset/hold-to-run buttons allow the operator to readily reset the bottom feed stop bar. The EcoIdle engine control system can help aid in noise reduction, as well as help consumer less fuel if the feeding process has frequent interruptions. helps increase operator productivity while reducing strain on vital engine parts. The feedsensing control system monitors engine rpm and automatically stops and reverses the feed roller when feeding larger, hardwood material. LARGE FEED OPENING. A large rectangular 12” x 17” (30.5 cm x 43.2 cm) feed opening helps boost productivity by reducing the need to trim material before feeding it into the chipper. CLUTCHLESS PTO. The throttle integrated with extended limited warranty on drum housing, cutter drum, shaft and hubs offers peace of mind, in addition to the 1-year/1000-hour Vermeer equipment limited warranty. the belt drive engagement process helps ensure that the PTO can only be engaged while the engine is at low idle/low rpm. Automatically, the engine throttles up to full rpm after the belt drive is fully engaged. This system helps to reduce premature wear to the belt drive system by preventing high idle engagement of the cutter drum.

BC1000XL BRUSH CHIPPER GENERAL CUTTING SYSTEM Drum dimensions: 22" diameter x 20" wide (55.9 cm x 50.8 cm) Knives: Two A8 chipper steel reversible Shear bar: Four usable edges Engagement system: Clutchless belt drive PTO ENGINE OPTION ONE Make and model: Deutz D2.9L Tier 4 Final Fuel type: Diesel Cooling medium: Liquid Lights: LED stop, turn, tail, license ENGINE OPTION TWO Make and model: Deutz TD2.9L Tier 4 Final Horsepower: 74 hp (55 kW) Max torque: 181 ft-lb (245.4 Nm) Fuel type: Diesel Number of cylinders: 4 Cooling medium: Liquid FEED SYSTEM Chipping capacity (max): 12" (30.5 cm)...