Catalogs >
Vermeer >
HG4000E HORIZONTAL GRINDER

HG4000E HORIZONTAL GRINDER
2Pages

Catalog excerpts

HORIZONTAL GRINDER DUPLEX DRUM. To reduce daily maintenance CHIP DRUM. For enhanced flexibility within a DUAL SCREENS. Hinged, dual screens boost time, the patented duplex drum, designed with reversible tips and hammers, is available. single machine, a dedicated chip drum, adjustable for product size ranging from .125" to 1" (.3 cm to 2.5 cm), is available. processing efficiency and offer flexibility in endproduct sizing. WIDE INFEED TABLE. A 60" (152.4 cm) wide MOTOR STARTER PANEL. The motor starter panel provides options to configure a control system that best fits your application — whether that’s a soft-start or variable frequency drive (VFD) panel. ELECTRIC MOTORS. Equipped with a 500 hp (373 kW) WEG totally enclosed, fan-cooled electric motor to power the mill. A separate 50 hp (37 kW) electric motor powers the pump for the hydraulic circuits, while a 2 hp (1 kW) electric motor powers the fan to cool the hydraulic system. infeed table with flared sidewalls can accommodate a large volume of material.

Open the catalog to page 1

HG4000E HORIZONTAL GRINDER GENERAL DIMENSIONS CHIP DRUM OPTION Depth of cut: Ranging from .125" to 1" (.3 cm to 2.5 cm) ELECTRIC MOTORS DISCHARGE SYSTEM Belt design: 3-ply - 330# with V-cleat Hydraulic motor horsepower: 50 hp (37 kW) Mill motor horsepower: 500 hp (373 kW) Voltage: 380 V/460 V HYDRAULIC SYSTEM Phase: Three phases Implement pump: Variable displacement, axial piston Enclosure: TEFC (totally enclosed, fan-cooled) Discharge conveyor pump: Fixed displacement, gear pump INFEED CONVEYOR CONTROL PANEL OPTIONS Feed table width: 60" (152.4 cm) VFD (variable frequency drive) panel: 380...

Open the catalog to page 2