maintenance First of all, the life of Vesco tools depends on the way the operator looks after them. If the following maintenance operations are carried out correctly and regularly, the shears will always work perfectly and they will also last longer. Maintenance (A set and T set) – Clean all the tool parts accurately after the shears are used; – lubricate the rotating parts and the spring once a week; – sharpen the mobile blade when it does not cut properly using Vesco stones F2, F3 or F4 type (specially recommended for branch-cutters); – check and adjust the blade and counter-blade play. If it is necessary; – check all the tightening of all the screws once a week.

maintenance Play adjustement 1 Lock a n° 17 tube wrench in a vice; 2 fit the central screw hexagonal head into the tube wrench and tighten slightly; 3 use a n° 14 wrench to tighten the central nut; 4 turn the n° 14 wrench and shears simultaneously (the same way as the arrow) until the spring is able to open the shears. Maintenance (C set) The Vesco saws (C set) need no maintenance. No sharpening is necessary for the blade. Maintenance (B set) – Clean all the tool parts accurately after the shears are used; – lubricate the rotating parts once a week; – sharpen the blade edge when it doesn’t cut...