*myagriexpo

IN-LINE VALVES

Product catalog summary

Overview: Vincke offers a wide range of hydraulic valves for industrial applications, including directional control, pressure control, flow control, shuttle, sequence, and check valves. These valves are recognized for their reliability and cost efficiency.

Relief Valves: Available in in-line and panel mounting options, these valves support fluid viscosities of 30-100 mm/s, require 25µ filtration, and can operate at pressures up to 350 Bar. Constructed from zinc-plated steel with NBR seals, they function within fluid temperatures of -20ºC to +90ºC and ambient temperatures of -20ºC to +50ºC.

Solenoid Valves: Offered in normally open and closed configurations, these valves can handle pressures up to 280 Bar. Made from aluminum with NBR seals, they are available in 12V, 24V, and 220V versions, featuring manual override options.

Coils: Vincke coils come in 18W and 22W power ratings with insulation classes F and H. They are designed for continuous duty and operate in ambient temperatures from -30ºC to +50ºC, with an IP rating of 54.

Check Valves: These include external pilot-operated single and double check valves, supporting pressures up to 350 Bar and fluid temperatures from -20ºC to +90ºC.

Hose Burst Valves: Designed to prevent hose burst incidents, these valves operate at pressures up to 350 Bar and have a maximum leakage rate of 0.25 cm3/min.

Key Specifications: Vincke valves are built to withstand high pressures and temperatures, ensuring durability and performance in demanding environments.

Flow Control Valves: The document details specifications for unidirectional, bidirectional, compensated, and proportional flow regulators, as well as load control, sequence, shuttle, and directional valves. Operating conditions include fluid viscosities from 2.8 to 550 mm²/s, fluid temperatures between -20ºC and +90ºC, and ambient temperatures from -20ºC to +50ºC.

Unidirectional and Bidirectional Flow Control Valves: Constructed from zinc-plated steel, these valves support flow rates from 15 to 80 l/min and pressures up to 350 Bar.

Compensated Flow Control Valves: These maintain constant flow rates despite pressure changes, with a maximum pressure of 250 Bar.

Proportional Flow Regulators: Allow precise flow control, available in 12 VDC and 24 VDC versions, with a maximum pressure of 241 Bar and flow rates up to 110 l/min.

Load Control Valves: Suitable for high-pressure applications up to 350 Bar, with a pilot ratio of 4.25:1.

Sequence and Shuttle Valves: Used for controlling operation sequences and directing flow, constructed from zinc-plated steel.

Directional Valves: Available in manual and rotary configurations, handling flow rates up to 200 l/min and pressures up to 400 Bar.

Flow Dividers: Spool flow dividers split flow between paths, supporting pressures up to 300 Bar.

General Recommendations: Proper filtration according to ISO standards is essential for optimal performance. Standard seals are NBR, and external surfaces are zinc-plated for corrosion resistance.

Catalog excerpts

Vincke offers a wide range of hydraulic valves for all industrial applications. We manufacture all types of hydraulic valves: from directional control valves to pressure control, flow control, shuttle, sequence, check, from standard on/off valves to high-dynamic proportional valves. Common to all is the combination of outstanding reliability and cost efficiency which makes them the appropriate solution for almost any operational purpose.

Open the catalog to page 3

VINCKE IN-LINE VALVES VINCKE RELIEF VALVES IN-LINE PANEL MOUNTING RELIEF VALVES SPECIFICATIONS Fluid viscosity: Filtration: Ambient temperature: Fluid temperature: Ambient temperature: Standard code

Open the catalog to page 4

VINCKE IN-LINE VALVES VINCKE RELIEF VALVES RELIEF VALVES SPECIFICATIONS Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Manifold material: ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 350 Bar NBR Zinc plated steel Flow (l/min) Std setting at 5 l/min Standard code

Open the catalog to page 5

Open the catalog to page 6

Open the catalog to page 7

VINCKE IN-LINE VALVES VINCKE RELIEF VALVES DOUBLE RELIEF VALVES SPECIFICATIONS Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Manifold material: ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 350 Bar NBR Zinc plated steel Flow (l/min) Std setting at 5 l/min Standard code

Open the catalog to page 8

VINCKE IN-LINE VALVES VINCKE SOLENOIDS VALVES SPECIFICATIONS Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: SPECIFICATIONS 3/8 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium push knob Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: 1/2 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium push knob Standard code Standard code

Open the catalog to page 9

VINCKE IN-LINE VALVES VINCKE SOLENOIDS VALVES SPECIFICATIONS Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: SPECIFICATIONS 3/8 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium screw Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: 1/2 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium push and twist Standard code Standard code

Open the catalog to page 10

VINCKE IN-LINE VALVES VINCKE SOLENOIDS VALVES 2/2 NORMALLY OPEN DOUBLE LOCK VALVE 40L SPECIFICATIONS Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: SPECIFICATIONS 3/8 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium screw Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: 1/2 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium push button Standar code Standar code

Open the catalog to page 11

VINCKE IN-LINE VALVES VINCKE SOLENOIDS VALVES 2/2 NORMALLY CLOSED DOUBLE LOCK VALVE 15L /30L SPECIFICATIONS Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: SPECIFICATIONS 3/8 ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 280 Bar NBR Aluminium push knob Thread: Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Material: Type override: Standard code Standard code

Open the catalog to page 12

VINCKE IN-LINE VALVES VINCKE COIL Power Coil insolation class ED Supply power tolerance Ambient temperature IP Coil Power Coil insolation class ED Supply power tolerance Ambient temperature IP Coil Standard code Standard code

Open the catalog to page 13

VINCKE IN-LINE VALVES VINCKE OVERRIDE TYPES OVERRIDE TYPES SCREW Description: To operate this override, manually unscrew/screw-in the knob to full stroke position. Once in this mode, the override is self-detended. To return to the de-energized mode, screw-in/unscrew the override knob until positive stop occurs. External dimensions change depending on the valve type. PUSH AND TWIST Description: To operate this override, manually push and twist the knurled knob counterclockwise/clockwise. Once in this mode, the override is selfdetended. To return to the de-energized mode, push and twist the override...

Open the catalog to page 14

VINCKE IN-LINE VALVES VINCKE CHECK VALVES EXTERNAL PILOT OPERATED SINGLE CHECK VALVES SPECIFICATIONS Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Standard seals: External surfaces: ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC NBR Zinc plated steel Flow (l/min) X = 1 bar Std Y = 3 bar Z = 8 bar Standard code Pilot ratio

Open the catalog to page 15

VINCKE IN-LINE VALVES VINCKE CHECK VALVES SINGLE PILOT CHECK VALVE 90O SPECIFICATIONS Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: External surfaces: ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 350 Bar NBR Zinc plated steel Flow (l/min) Y = Std on table X = 1 bar Standard code Pilot ratio

Open the catalog to page 16

VINCKE IN-LINE VALVES VINCKE CHECK VALVES 90O DOUBLE PILOT OPERATED CHECK VALVES SPECIFICATIONS Fluid viscosity: Filtration: Fluid temperature: Ambient temperature: Max. operating pressure: Standard seals: Manifold material: ISO 3448 ISO 4406 -20ºC + 90ºC -20ºC + 50ºC 350 Bar NBR Zinc plated steel Flow (l/min) Standard code Pilot ratio

Open the catalog to page 17

IN-LINE VALVES

IN-LINE VALVES

Catalog excerpts

All VINCKE HYDRAULICS catalogs and technical brochures