VINCKE HYDRAULIC MOTORS
100Pages

VINCKE HYDRAULIC MOTORS

link to your page / link a su página Axial Distribution Type Motors VNKM Series Hydraulic Motor VNKP Series Hydraulic Motor VNKPH Series Hydraulic Motor VNKPK Series Hydraulic Motor VNKR Series Hydraulic Motor VNKRH Series Hydraulic Motor VNKRK Series Hydraulic Motor VNKH Series Hydraulic Motor Distribution Type Motors VNKSPLUS Series Hydraulic Motor VNKT Series Hydraulic Motor VNKV Series Hydraulic Motor VNKE2 Series Hydraulic Motor VNKJ Series Hydraulic Motor VNKR-ZD01 Series Hydraulic Motor Brake And Gearbox And Vavle ZDQ2 Series Hydraulic Brake

Usage Guide In order to make the motors working in optimal situation, we recommend the following: Oil temperature :normal 20℃~60℃ upper limit 90℃(no more than one hour). Filtering and oil cleanliness :a return filter should be installed in the system with a fineness in the range of 10~30µm and a piece of magnet should be installed at the bottom of the tank to prevent grits into the system. The max solid contamination grade of the oil is no more than 19/16. 3. Viscosity: 42~74 mm2/s at 40℃ of oil temperature ,according to the condition to choose an applicable hydraulic oil. 4. The motors can...

HYDRAULIC MOTORS VNKM SERIES HYDRAULIC MOTOR VNKM series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth. Characteristic features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or in series. * Advanced construction design, high power and low weight. Main Specification VNKM Type Geometric displacement (cm3/rev.)...

HYDRAULIC MOTORS PERFORMANCE DATA Flow (L/min) Flow (L/min) Flow (L/min) back to index / volver a índice Flow (L/min) Flow (L/min)

HYDRAULIC MOTORS VNKM END PORT DIMENSIONS AND MOUNTING DATA Code Mounting back to index / volver a índice

HYDRAULIC MOTORS VNKM SIDE PORT DIMENSIONS AND MOUNTING DATA M, U Flange Code Mounting back to index / volver a índice

VNKM SHAFT EXTENSIONS FOR VNKM MOTORS HYDRAULIC MOTORS Shaft A: Cylindrical shaft ø16 Parallel key 5x5x16 Shaft B: Cylindrical shaft ø15.875 Parallel key 4.8x4.8x19.05 Shaft C: Involute splind shaft B17x14 DIN5482 Motor Mounting Surface back to index / volver a índice

HYDRAULIC MOTORS VNKM SERIES HYDRAULIC MOTOR Permissible shaft seal pressure In applications without drain line, output shaft seal exceeds a bit of the pressure in the return line. When applications use the drain line, the pressure of output shaft seal equals the pressure in drain line. Direction of shaft rotation: Standard When facing shaft end of motor,shaft to rotate: Clockwise when port "A" is pressurized. Counter-clockwise port "B" is pressurized. VNKM End Port Status of the shaft's radial force back to index / volver a índice VNKM Side Port

back to index / volver a índice Shaft Ø16, parallel key 5×5×16 Shaft Ø15.875, parallel key 4.8×4.8×19.05 Shaft Ø16.5, involute B17×14, DIN5482 Output shaft Ports and drain port shaft and ports. If the specification is not in the table or you have specific requirements, please contact us. Standard Opposite Rotation direction Note:When the table is used, please fill the code of left rows in the table and give us, which the code information is consists of construction, displacement, mounting flange, output 3-M6 Circle-flange, pilot Ø31.5×5 3-1/4-28UNF Circle flange,pilot Ø31.5×5 2-Ø9...

VNKP SERIES HYDRAULIC MOTOR VNKP series motor are small volume, economical type , which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weight. •Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency. •Special design in the driver-linker and prolong operating life •Special design for distribution system can meet the requirement of low noise of unit. •Compact volume and easy installation. •HPS Shaft seal can bear high...

VNKP SERIES HYDRAULIC MOTOR Main Specification Technical data for VNKP with 31.75 and 32 shaft Type Geometric displacement (cm3/rev.) Max. speed (rpm) Max. torque (N•m) VNKP VNKP VNKP VNKP VNKPH VNKPH VNKPH VNKPH 200 250 315 400 •Continuous pressure:Max. value of operating motor continuously. •lntermittent pressure:Max. value of operating motor in 6 seconds per minute. •Peak pressure:Max. value of operating motor in 0.6 second per minute. back to index / volver a

PERFORMANCE DATA Flow (L/min) Flow (L/min) Flow (L/min) Flow (L/min) back to index / volver a índice

PERFORMANCE DATA Flow (L/min) Flow (L/min) Flow (L/min) Flow (L/min) back to index / volver a índice

PERFORMANCE DATA Flow (L/min) Flow (L/min) Flow (L/min) back to index / volver a índice

HYDRAULIC MOTORS VNKP DIMENSIONS AND MOUNTING DATA back to index / volver a índice

HYDRAULIC MOTORS VNKPH SHAFT EXTENSIONS DIMENSIONS DATA back to index / volver a

VNKP SHAFT EXTENSIONS DIMENSION DATA Shaft A: Cylindrical shaft ø25 Parallel key 8x7x32 Shaft C: Cylindrical shaft ø25.4 Parallel key 6.35x6.35x31.75 Shaft B: Cylindrical shaftø32 Parallel key 10x8x45 Shaft G: Cylindrical shaftø31.75 Parallel key 7.96x7.96x31.75 Motor Mounting Surface back to index / volver a índice

VNKP SHAFT EXTENSIONS DIMENSION DATA Shaft T3: Cone-shaft ø31.75 Parallel key 7.96x7.96x31.75 Tightening torque:200±10Nm Shaft R:Cylindrical shaftø25.4 Parallel key 6.35x6.35x31.75 Shaft T: Cone-shaft ø28.56 Parallel key B5x5x14 Tightening torque:100±10Nm Motor Mounting Surface back to index / volver a índice